北京超大电动餐桌厂家 电磁炉餐桌15人餐桌尺寸

高档酒店家具如何选购-佛山岚慧家具有限公司

How to choose high-end hotel furniture - Foshan Lanhui Furniture Co., Ltd

酒店客房家具的分类一般来说，酒店客房家具的功能要求和家具构成基本类似，相对来说，一般由以下家具构成：酒店套床、梳妆台、床头柜、行李柜、电视柜、休闲椅、茶几台面，等构成。衣柜一般由装修公司现场施工完成。那我们在对酒店家具的客房家具有的放矢进行材料结构设计时，可以着重从以下几个方面入手

Generally speaking, the classification of hotel room furniture is similar in terms of functional requirements and furniture composition. Relatively speaking, it is generally composed of the following furniture: hotel bed sets, dressing tables, bedside cabinets, luggage cabinets, television cabinets, leisure chairs, coffee table countertops, etc. Wardrobes are generally completed on-site by decoration companies. When designing the material structure of the hotel furniture's guest rooms, we can focus on the following aspects

\

(1)结构强度客房家具多为固定家具，一般结构板式为主，选用木螺钉，五金连接件和胶粘剂作为接合方式。在使用材料时应注意不同的材料00性，如刨花板，中密度板握钉力较差，忌用在需频繁活动或需要较强的握钉力的部位，如门铰链螺钉部位，抽轨底轨螺钉部位,容易松动产生声响。床屏、镜框墙上五金挂件部位应该00别注意或者用木材代替加固，目前流行木方45度倒挂结构。

(1) The structural strength of guest room furniture is mostly fixed furniture, usually with a panel structure as the main type, using wood screws, hardware connectors, and adhesives as the bonding method. When using materials, attention should be paid to different material properties. For example, particle board and MDF have poor nail holding force. It should not be used in places that need frequent activities or strong nail holding force, such as door hinge screw parts, rail extraction bottom rail screw parts, which are easy to loose and produce sound. The hardware hanging parts on the bed screen and mirror frame wall should not be neglected or reinforced with wood. Currently, a 45 degree inverted wooden structure is popular.

(2)外观质量外观质量首先要求家具台面平整，做工精细，装饰细腻，纹理清晰美观。客房家具通常使用刨花板，中密度纤维板，细木工板，层压板等几种作为基材，使用薄木，木单板，三夹板作为覆面材料。不同的基材和覆面材料其材料00性也各不相同，不注意材料的00性和正确的使用方法，常常会导致板件的翘曲。上海学勤家具厂建议板件背面与正面的覆面材料的结构00性必须相同或相近，基材含水率一般要求6~10%，选用的材料尽量同批次。在车间加工中尽量缩短装料与压机的时间，不同材料00性，不同覆面材料含水率，注意不同的涂胶厚度，压机时间和压力。

(2) Appearance quality: The first requirement for appearance quality is for furniture countertops to be flat, with fine workmanship, delicate decoration, and clear and beautiful textures. Guestroom furniture usually uses particle board, medium density fiberboard, blockboard, laminated board and other materials as base materials, and uses thin wood, wood veneer and plywood as cladding materials. Different substrates and cladding materials have different material properties. Failure to pay attention to the material properties and correct usage often leads to warping of the panel. Shanghai Xueqin Furniture Factory suggests that the structural properties of the cladding materials on the back and front of the panel must be the same or similar, and the moisture content of the substrate is generally required to be 6-10%. The materials used should be of the same batch as much as possible. Try to shorten the time between loading and pressing in the workshop processing. Different materials have different properties and moisture content of the covering materials, and pay attention to different coating thicknesses, pressing time, and pressure.

(3)高效生产同样材料成本的情况下，那种材料易于加工，那种工艺可以节省工艺成本提高效率，00别在立铣、镂铣、雕刻工序中，那种材料容易加工切削，容易光滑整洁。(4)材料成本同样满足使用要求的情况下尽量使用成本低的材料，在用大块面材料的同时注意同种小块材料的使用，综合提高板材利用率。客房家具一般数量较大，尽量使用计算机合理排料，大块料与小块料综合利用，降低材料成本。不同的结构，要注意材料成本的比较。

(3) In the case of efficient production of the same material cost, which material is easy to process and which process can save process costs and improve efficiency, especially in vertical milling, router milling, and carving processes, which material is easy to process and cut, and is easy to be smooth and tidy. (4) When the material cost also meets the usage requirements, try to use low-cost materials as much as possible. When using large surface materials, pay attention to the use of the same small materials, and comprehensively improve the utilization rate of the board. Guestroom furniture is generally in large quantities, and it is recommended to use computers for reasonable layout. Large and small pieces of furniture should be comprehensively utilized to reduce material costs. Pay attention to the comparison of material costs for different structures.

(5)安全性能一般酒店没有明确的甲醛游离量的规定，但有家具防火要求在酒店允许的情况下某些部位可以使用防火板、防烫油漆、阻燃面料等。高档酒店甚至要求制作家具的木材经过防火处理。\\\\输安装酒店楼层一般较高，要求家具重量轻便于运输。00别是有些连体床背、有些加长写字台，电梯不能运输，货梯一般在家具安装时已经拆除，如何安全运输，从材料重量与结构上需00别考虑。以上这些方面的因素在实际应用中需综合考虑交叉运用，酒店家具的功能要求造型细节与酒店家具公司合理的材料结构和车间工艺安排具有互动关系，上海学勤家具厂建议尽量使生产的客房家具既符合酒店要求，又能高效生产、降低成本，运用专业化的加工工艺、加工设备，使生产的家具符合高档酒店以人为本的舒适要求。

(5) Generally, hotels do not have clear regulations on the amount of formaldehyde free, but there are fire protection requirements for furniture. If allowed by the hotel, certain parts can use fireproof boards, anti scald paint, flame retardant fabrics, etc. Upscale hotels even require the wood used to make furniture to undergo fire protection treatment\\\\ The floors of transportation and installation hotels are generally high, requiring furniture to be lightweight and easy to transport. There are some connected bed backs and some extended desks that cannot be transported by elevators. Goods elevators are usually removed during furniture installation. How to safely transport them depends on the material weight and structure. The above factors need to be comprehensively considered for cross application in practical applications. The functional requirements of hotel furniture require that the design details have an interactive relationship with the reasonable material structure and workshop process arrangement of the hotel furniture company. Shanghai Xueqin Furniture Factory suggests that the guest room furniture produced should not only meet the hotel's requirements, but also be able to produce efficiently and reduce costs. Professional processing techniques and equipment should be used, Make the furniture produced meet the comfort requirements of high-end hotels that are people-oriented.