电动旋转机芯自动餐桌报价 旋转电动餐桌转盘定

全面解读定制酒店家具制作工艺6大步骤!-佛山岚慧家具有限公司

Comprehensively interpret the 6 major steps of customized hotel furniture production process- Foshan Lanhui Furniture Co., Ltd

【知识】全面解读定制酒店家具制作工艺6大步骤!生活中传统家具给家装带来诸多不便，也给大众生活打来诸多困扰，而定制酒店家具则很好的解决了这些问题，尤其是酒店家具，需根据自身定位和风格找专业酒店家具厂家定制。相信很多人都不了解定制的工艺，下面正美家具给大家介绍介绍。

【 Knowledge 】 Comprehensively interpret the 6 steps of customized hotel furniture production process! Traditional furniture in daily life brings many inconveniences to home decoration and also brings many troubles to public life. Customized hotel furniture effectively solves these problems, especially hotel furniture, which needs to be customized by professional hotel furniture manufacturers based on their own positioning and style. I believe many people are not familiar with customized craftsmanship. Below is an introduction to Zhengmei Furniture.

 

 

 

1、放样无论你是定制酒店的餐桌还是餐椅，又或是酒柜，每件家具产品生产之前都要先经过放样师放好样，不过放样一般只用在做异型的家具结构上。

1. Whether you are customizing a hotel dining table, dining chair, or wine cabinet, each piece of furniture product needs to be laid out by a laying out engineer before production. However, laying out is generally only used for making irregular furniture structures.

2、选料开料通常而言，家具工厂选料都是按照以下标准来进行的：①、木材材质纹理美观，重量适中，强韧度要好;

2. Generally speaking, furniture factories select materials according to the following standards: ① The wood material has beautiful texture, moderate weight, and good strength and toughness;

②、注重木材质量，剔除死节、爆裂、发黑、发霉及树芯线等缺陷，体现良好的用材水准。之后就是安排开料，每件产品都是按照图纸上的尺寸比例来开好料的，开好料的产品则先拿到木工车间先开始生产。

 

 

 

 

② Pay attention to the quality of wood, eliminate defects such as dead knots, bursts, blackening, mold, and tree core lines, and demonstrate good material quality. Afterwards, we will arrange for cutting materials. Each product will be cut according to the size ratio on the drawing, and the products that have been cut will be taken to the woodworking workshop for production.

3、木工木工其实就是产品的各分件从开好料的毛件加工成图纸所要求的形状与尺寸的一个过程。

3. Woodworking is actually the process of processing each component of a product from raw materials to the shape and size required by the drawings.

4、油漆油漆这一步对于家具做出来的效果影响是至关重要的，其表面的光滑度、亮度决定着家具的美观度。不过正美家具认为，好的家具品牌、环保的产品在用漆上是严格要求的，甚至采用别的技术或材质弥补。5、扪布沙发椅子或其他需要扪布的产品，在做完油漆之后就要开始扪布了，工序流程大概为裁布/裁海绵—喷胶—扪布，首先要将布料与海绵都裁剪好，海绵才好之后要放到家具上面比下比例，有弧度的要将弧度磨出来，

 

 

 

 

 

4. The step of painting and painting is crucial for the effect of furniture production, as the smoothness and brightness of the surface determine the aesthetics of the furniture. However, Zhengmei Furniture believes that good furniture brands and environmentally friendly products require strict paint requirements, and even use other technologies or materials to compensate. 5. After finishing the paint, the fabric cutting process for sofas, chairs, or other products that require fabric cutting should begin. The process flow is approximately fabric cutting/sponge cutting; Glue spraying&flash; To touch the fabric, first cut both the fabric and the sponge. After the sponge is ready, place it on the furniture to compare the ratio. If there is a curve, grind it out,

然后固定在家具上就好了，接下来喷好胶后扪布就好了，扪布用到的拉扣还有布拉扣与水晶拉扣等等。6、安装与包装所有产品的工序都完成之后，就要将一些配件等等安装上去了，安装完毕产品也完成了。产品的包装对于保护产品方面也是至关重要的，一般都要先用珍珠棉包好家具的每个部位再用纸皮进行包装，再用胶带全部封好，然后再进行钉木架保护。

 

 

 

 

Then fix it on the furniture, and then spray the glue and touch the cloth. The pull buttons used for touch the cloth include brass buttons and crystal pull buttons, etc. 6. After the installation and packaging of all products are completed, some accessories, etc. need to be installed, and the installation of the product is also completed. The packaging of the product is also crucial for protecting the product. Generally, each part of the furniture should be wrapped with pearl cotton first, then packaged with paper, and then sealed with tape before being protected with a wooden frame.