|定制木质电动餐桌的关键 |The key to customizing wo

|定制木质电动餐桌的关键 |The key to customizing wo详细说明

|定制木质电动餐桌的关键
|The key to customizing wooden electric dining tables










一、观察木质质地    打开电动餐桌机芯、抽屉，观察木质是否干燥洁白，质地是否紧密细腻。    确定定制电动餐桌使用的是哪一种材料。实木有很多种，如松木或橡木。松木属于软木，取材于常青的松树。这种木材的纹理稀松多孔，表面容易凹陷。常青木由于成长迅速，因此较为便宜。硬木如樱桃、橡木、枫木，均取材于落叶树，木纹紧密细腻，木质坚固。这些树木生长期长，作为原料它们通常要比软木昂贵许多。
1、 Observe the wood texture, open the movement and drawers of the electric dining table, and observe whether the wood is dry, clean, and white, and whether the texture is tight and delicate. Determine which material is used for customizing an electric dining table. There are many types of solid wood, such as pine or oak. Pine belongs to the category of cork and is made from evergreen pine trees. This type of wood has a loose and porous texture, and its surface is prone to dents. Evergreen wood is relatively inexpensive due to its rapid growth. Hardwood such as cherry, oak, and maple are all made from deciduous trees, with dense and delicate wood grain and sturdy wood. These trees have a long growth period and are usually much more expensive as raw materials than cork.










二、木料是整块还是拼接    如果是非全实木电动餐桌，购买时，一定要商家在合同上写清楚一样电动餐桌中的各个部分用的分别是什么木材。实木电动餐桌使用的材料中，有纯实木整板和直接板之分。纯实木整板是整块的原木锯材，直接板则是由一些木材的边角料拼接而成。看似制作工艺问题，但是和材料也很有关系，尤其是直接木。目前市面上的直接木，一般都是橡胶木。很多情况下，商家或厂家会用橡胶木来冒充橡木，这两种材料在材质和价格上都有着天壤之别。橡胶木一般都是国产的，而橡木是只有进口的。   
2、 If it is a non solid wood electric dining table, the seller must clearly state in the contract which wood is used for each part of the same electric dining table, whether it is a whole piece or a joint. There are two types of materials used for solid wood electric dining tables: pure solid wood whole board and direct board. Pure solid wood whole board is a whole piece of sawn timber, while direct board is made by splicing some wood scraps. It may seem like a manufacturing process issue, but it is also closely related to the materials, especially direct wood. At present, the direct wood on the market is generally rubber wood. In many cases, merchants or manufacturers will use rubber wood to impersonate oak, and these two materials have a huge difference in material and price. Rubber wood is generally domestically produced, while oak is only imported.










三、观察纹理疤痕    全实木电动餐桌存在天然的色差，其色泽、纹理有一定的差异，实木贴皮的电动餐桌外观上缺陷则很少，其纹理清晰甚至优于全实木电动餐桌。消费者可以利用实木的纹理和疤结，分别看外表和背面相应的位置，如果对应得很好则是纯实木的。另外，看疤痕也是鉴定纯木的好方法，看好疤痕的一面所在位置，再在另一面找是否有相应纹理。四、注意实木电动餐桌木材的含水率和产地    国内各地区的气候对木材含水率是有影响的，木材含水率不得高于使用地区当地平衡含水率的1%，否则，木材由于胀缩大易造成榫卯分离、电动餐桌散架，还会引起翘曲。
3、 Observing the texture scars, there is a natural color difference in the electric dining table made of solid wood, with certain differences in color and texture. The electric dining table made of solid wood veneer has few defects in appearance, and its texture is clear and even better than that of the electric dining table made of solid wood. Consumers can use the texture and scars of solid wood to look at the corresponding positions on the surface and back, and if they match well, it is pure solid wood. In addition, looking at scars is also a good way to identify pure wood. Pay attention to the location of one side of the scar, and then look for the corresponding texture on the other side. 4、 Note that the moisture content of solid wood electric dining table wood and the climate in different regions of the country of origin have an impact on the moisture content of the wood. The moisture content of the wood should not be higher than 1% of the local equilibrium moisture content in the usage area. Otherwise, due to the large expansion and contraction of the wood, it is easy to cause tenon and mortise separation, electric dining table scattering, and may also cause warping.








五、敲击并观察实木结构部分    敲击柜子的框架、床的支撑。观察是否全部干燥、有无开裂。询问木材种类、产地、处理工艺。看框架是否规整稳固、转角是否平整自然，结合部采用精良的木榫、五金还是便宜的枪钉？机芯的上下是否平整贴合。六、亲手触摸雕刻部分    观察雕刻部分是否规整，雕工的精细程度，比例是否恰当，是否与电动餐桌融为一体。转角处是否连贯。    好的实木电动餐桌在日后的使用中，它的优良品质才会显现出来，在选购实木电动餐桌时，一定要看准小编为你介绍的这几个关键点，才能选到让您放心的实木电动餐桌。   
5、 Tap and observe the solid wood structure, tap the frame of the cabinet, and support the bed. Observe if everything is dry and there are no cracks. Inquire about the type, origin, and processing technology of wood. Check whether the frame is neat and stable, whether the corners are smooth and natural, and whether the joint is made of high-quality wooden tenons, hardware, or cheap gun nails? Whether the upper and lower parts of the movement are flat and tightly fitted. 6、 Touch the carved part with your own hands to observe whether it is neat, the level of craftsmanship, the appropriate proportion, and whether it is integrated with the electric dining table. Is there continuity at the corner. A good solid wood electric dining table will only show its excellent quality in future use. When choosing a solid wood electric dining table, you must pay attention to the key points introduced by the editor in order to choose a solid wood electric dining table that you can rest assured of.