一家专业电动餐桌订制生产的工厂!
4年服务上家酒店,数家会所及别墅!全国300多家经销代理商!!
立即咨询:13925433337【微信同号】

当前位置:主页 > 自动餐桌 >

电动餐台定制|电动餐台如何设计才合理

电动餐台定制|电动餐台如何设计才合理

型号:
139-254-33337 立即咨询
价格:

咨询电动餐台定制|电动餐台如何设计才合理订购热线

电动餐台定制|电动餐台如何设计才合理配置参数

品 牌 形状 风格 颜色
材质 功率 电源 工艺
发货地 供货总量 尺寸 配置
是否订制 发货时间 使用场所 定制方式

电动餐台定制|电动餐台如何设计才合理详细说明

电动餐台定制|电动餐台如何设计才合理
Customized electric dining table | How to design an electric dining table reasonably





电动餐台结构直型衣橱的结构首先,板式电动餐台的组合是侧板包(底)板,侧板与(底)板的连接是用三合一和木梢连接的。电动餐台前后都有脚线,脚线高度为70mm。
The structure of an electric dining table and a straight wardrobe. Firstly, the combination of a plate type electric dining table is a side panel (bottom) board, and the connection between the side panel and the bottom board is connected by a three in one and wooden tips. The electric dining table has a foot line at the front and back, with a height of 70mm.
其次,电动餐台要做趟门,如果没有柜,需在板上面加一块18mm厚的180mm宽的上垫板,用来装趟门的上导轨,另外在下面还要加一块18mm厚的110mm宽的下垫板装趟门的下导轨。后,对于电动餐台衣帽间侧板,(底)板为490mm深的柜子,背板包槽15mm,槽宽6*6mm深。层板深度为475mm。
Secondly, the electric dining table needs to be equipped with a sliding door. If there is no cabinet, an 18mm thick 180mm wide upper cushion plate needs to be added on top of the plate to install the upper guide rail of the sliding door. In addition, an 18mm thick 110mm wide lower cushion plate needs to be added below to install the lower guide rail of the sliding door. Afterwards, for the side panel of the electric dining table and the wardrobe, the (bottom) panel is a 490mm deep cabinet, and the back panel has a groove of 15mm with a width of 6 * 6mm deep. The depth of the laminate is 475mm.





对于侧板,(底)板为550mm深的柜子,背板包槽15mm,槽宽6*6mm深。层板深度为485mm。带柜衣橱的结构首先,电动餐台要做趟门带柜,上导轨直接装在柜的底板上;不过在下面还是要加一块18mm厚的110mm宽的下垫板装趟门的下导轨。
For the side panel, the (bottom) panel is a cabinet with a depth of 550mm, and the back panel has a groove of 15mm with a width of 6 * 6mm deep. The depth of the laminate is 485mm. The structure of a wardrobe with a cabinet. Firstly, the electric dining table needs to be equipped with a door and cabinet, and the upper guide rail is directly installed on the bottom plate of the cabinet; However, an 18mm thick and 110mm wide bottom pad needs to be added below to install the lower guide rail of the door.
后,柜做平开门总深度是600mm,侧板是580mm深,背板包槽15mm,槽宽6*6mm深。如有中侧板是565mm。电动餐台功能分区被褥区根据棉被通常的高度,这个区域通常高400—500mm,宽900mm。这个空间主要是存放换季不用的被子,由于拿取物品不方便,通常会将电动餐台上端做被褥区,也有利于防潮。
Afterwards, the total depth of the cabinet's swing door is 600mm, the side panel is 580mm deep, the back panel is wrapped in a 15mm groove, and the groove width is 6 * 6mm deep. If there is a middle side panel, it is 565mm. The electric dining table is divided into functional zones. The bedding area is usually 400-500mm high and 900mm wide according to the usual height of the quilt. This space is mainly used to store seasonal unused blankets. Due to the inconvenience of retrieving items, the upper end of the electric dining table is usually used as a bedding area, which is also conducive to moisture prevention.





叠放区这个区域可以设计为可以调节的活动板层,方便根据需求变化高度或改为其他区域,例如挂放衣服增多后可以安放挂衣杆改为上衣区。这个区域主要用于叠放毛衣、T恤、休闲裤等衣物。好安排在腰到眼睛之间的区域,这样拿取方便。
The stacking area can be designed as an adjustable activity board layer, making it convenient to change the height or change to other areas according to needs. For example, when more clothes are hung, a hanging pole can be placed to change to a top area. This area is mainly used for stacking sweaters, T-shirts, casual pants, and other clothing. Arrange it in the area between the waist and the eyes for easy access.
根据一般衣物折叠后的宽度来看,柜子宽度应在330—400mm之间,高350—400mm。长衣区高1400—1500mm,不低于1300mm。长衣区主要用于悬挂风衣、羽绒服、大衣、连衣裙、礼服等长款衣服。可根据自己拥有长款衣服的件数设计长衣区的宽度,通常宽450mm够一个人使用,如果较多人口使用,可适当加宽或设计多个长衣区。
According to the width of folded clothing, the cabinet width should be between 330-400mm and the height should be 350-400mm. The height of the Changyi area is 1400-1500mm, not less than 1300mm. The long clothing area is mainly used for hanging long clothes such as windbreakers, down jackets, coats, dresses, and formal dresses. You can design the width of the long clothing area according to the number of pieces you own, usually 450mm wide enough for one person to use. If there is a large population using it, you can appropriately widen or design multiple long clothing areas.





另外如果空间不是te别紧张的话,建议选择600mm深度,这样挂衣服比较舒适。上衣区高1000—1200mm,上衣区用来悬挂西服、衬衫、外套等易起褶皱的上衣。
Also, if the space is not tight, it is recommended to choose a depth of 600mm, which makes hanging clothes more comfortable. The top area is 1000-1200mm high and is used to hang easily wrinkled tops such as suits, shirts, and jackets.
为了方便放娶衣架挂衣杆和柜之间应大于等于60mm。根据衣服的正常长度,为了使衣服不拖到板底上挂衣杆到底板之间应大于900mm。另外注意的是根据个人的身高情况挂衣杆到地面的距离不要超过1800mm,否则不方便拿取。抽屉区宽400—800mm,高190mm。这个
For convenience, the distance between the clothes hanger and the cabinet should be no less than 60mm. According to the normal length of the clothes, in order to prevent them from dragging to the bottom of the board, the distance between the clothes hanging rod and the bottom plate should be greater than 900mm. Additionally, it should be noted that the distance between the clothes hanging pole and the ground should not exceed 1800mm based on individual height, otherwise it may be inconvenient to retrieve. The drawer area is 400-800mm wide and 190mm high. this
立即拨打:13925433337


买电动餐台定制|电动餐台如何设计才合理的联系方式

工厂:佛山市岚慧家具有限公司
联 系 人:邱生;
电 话:13925433337;
微 信:13925433337;
Q Q:305040938;
座 机:0757-63360531;
公司地址: 广东佛山市西樵镇大同七星工业区

点击咨询

电动餐桌买卖客服二维码

上一篇:全屋定制电动餐桌应该如何选购 How to choose a cu
下一篇:实木电动餐台材质如何做好防尘 How to make solid


更多新款电动餐台定制|电动餐台如何设计才合理流行排行榜


更多热销电动餐台定制|电动餐台如何设计才合理新款推介


文章来源:
未知
欢迎转载,本文标题:电动餐台定制|电动餐台如何设计才合理
转载请注明原文网址:http://www.7s2s.com/zidong/2024/1008/14081.html