选购自动餐桌椅应该注意哪些方面

选购自动餐桌椅应该注意哪些方面详细说明

选购自动餐桌椅应该注意哪些方面
What aspects to pay attention to when choosing automatic dining tables and chairs






目前市场上供应的酒店桌椅，一般采用钢管支架和配置玻璃钢台面或者防火板为主。由于造型新颖、线条流畅，比较受消费者的欢迎。在购买时应注意以下几点1、自动餐桌椅的稳定安全性。餐桌餐椅的着地平稳性是否平稳无晃动，椅子人试坐后是否有倾覆现象。软面椅凳面的包覆部位是否饱满牢固，色泽颜色是否有差异。
The hotel tables and chairs currently available in the market generally use steel pipe brackets and are equipped with fiberglass countertops or fire-resistant panels. Due to its innovative design and smooth lines, it is quite popular among consumers. When purchasing, the following points should be noted: 1. The stability and safety of automatic dining tables and chairs. Is the landing stability of the dining table and chairs stable without shaking, and is there any overturning phenomenon after the chair person tries to sit. Is the covering area of the soft seat full and firm, and is there any difference in color.






2、餐桌椅台面的要求。桌面的钢化玻璃台面厚度一般应大于等于12mm，玻璃钢、防火板厚度一般是25mm，台面的端边、磨边是否平直光滑无钝角、玻璃无划痕、缺角等。3、自动餐桌椅的表面饰面质量。钢制部位的表面饰面是否光滑平整，无涂层或镀层脱落，无锈迹;台面表面平整光滑，无划痕等缺陷。
2. Requirements for dining table and chair countertops. The thickness of the tempered glass countertop of the desktop should generally be greater than or equal to 12mm, and the thickness of fiberglass and fireproof board is generally 25mm. The end edges and ground edges of the countertop should be straight and smooth without obtuse angles, and the glass should be free of scratches, missing corners, etc. 3. The surface finish quality of automatic dining tables and chairs. Whether the surface finish of the steel parts is smooth and flat, without coating or coating peeling off, and without rust; The surface of the countertop is flat and smooth, without defects such as scratches.






4、自动餐桌椅的制作质量。钢木底架或支架的焊接是否有脱焊虚焊裂缝现象，螺钉或铆钉连接部位是否松动;钢管架与台面连接是否牢固无松动。 5、餐桌椅的主要尺寸。行业标准规定餐桌的高度为680mm-760mm;餐椅的座高为400mm-440mm;软面椅座高为400mm-460mm，扶手椅扶手内宽大于等于460mm。
4. The production quality of automatic dining tables and chairs. Whether there is any detachment or virtual welding cracks in the welding of the steel and wood frame or bracket, and whether the connection parts of screws or rivets are loose; Check if the connection between the steel pipe rack and the countertop is firm and not loose. 5. The main dimensions of dining tables and chairs. The industry standard stipulates that the height of the dining table is 680mm-760mm; The seat height of the dining chair is 400mm-440mm; The height of the soft faced chair seat is 400mm-460mm, and the inner width of the armrest of the armchair is greater than or equal to 460mm.