排椅的体态征 The physical characteristics of row chairs

排椅的体态征 The physical characteristics of row chairs详细说明

排椅的体态征
The physical characteristics of row chairs




排椅的体态征现代人的聪明之处就是事物既要美观也要有实用性！一件事物，如果美观度不行的话，会被人所遗弃！同理，如果你只有了美观性，而没有了实用性，这样会更危险，更不被挑剔的现代人接受！就在一个很漂亮的公园里，如果你安装一个很挫的椅子，这样就会大大降低了公园的美观性，正如好马配好鞍，公园漂亮，我们就选一款时尚一点，能够配得住公园气质的椅子，这样会相得益彰！还有，公园人多，我们就设计一款能够坐5至6人的椅子来减少空间！当你漫步公园，坐在舒服的，稳定的椅子上时，你会奇怪为什么排椅可以一下子装下5个人而不倒？
The body shape of the row chair represents the intelligence of modern people, which is that things should be both beautiful and practical! If something is not aesthetically pleasing, it will be abandoned by people! Similarly, if you only have aesthetics and no practicality, it will be more dangerous and less accepted by discerning modern people! In a very beautiful park, if you install a very bumpy chair, it will greatly reduce the aesthetics of the park. Just as a good horse with a good saddle makes the park beautiful, we should choose a stylish chair that can match the temperament of the park, which will complement each other! Also, there are many people in the park, so we designed a chair that can seat 5 to 6 people to reduce space! When you stroll in the park and sit on comfortable, stable chairs, you wonder why row chairs can fit 5 people at once without collapsing?




所谓排椅，就是供多人同时坐的椅子，排排坐的意思。一般用于寺庙，家祠，戏院，在户外使用，家居的日常生活一般不用。下面电动桌厂家就详细为您介绍一下排椅的结构吧！从结构上说，一般要允许5个以上的人同时坐，由于是在户外使用，结构一般不会太复杂，但一定要结实，从实用角度看，也没必要做个实心的靠背；但是下盘用料就很足，座面是板，而且很厚，椅子腿部粗壮，而且两个S足中间有四个支撑，这都是为了户外，多人，而且是多人同时使用考虑的。一种排椅之支撑结构，其主要包含有一具预定长度之横杆、两脚架、数张座椅，该横杆设于脚架上，而座椅架设于横杆上，脚架为一弧形底杆及一直立杆组合，底杆两端设有调整脚垫；下端各具内螺孔，下端与底杆之凸柱组合，而上端可组立一结合片，该结合片呈冂型长片，两侧延伸小片体，结合片上有数定位孔，以结合另一冂型片体； 该横杆呈中空底面设一开放的长孔，以底面向上扳折两小阻挡片，可令冂型片体入于横杆内部，并受限于两小阻挡片，
The so-called row chair refers to a chair designed for multiple people to sit in a row at the same time. Generally used in temples, ancestral halls, theaters, for outdoor use, but not for daily household life. Below, the electric desk manufacturer will provide you with a detailed introduction to the structure of the row chairs! Structurally speaking, it is generally allowed for more than 5 people to sit at the same time. As it is used outdoors, the structure is generally not too complicated, but it must be sturdy. From a practical perspective, there is no need to make a solid backrest; But the materials used for the lower part are sufficient, the seat surface is made of board and thick, the legs of the chair are thick, and there are four supports between the two S-legs, all of which are designed for outdoor use, multiple people, and simultaneous use. A support structure for a row of chairs, mainly comprising a predetermined length crossbar, two legs, and several seats. The crossbar is set on the tripod, and the seat frame is set on the crossbar. The tripod is a combination of an arc-shaped bottom pole and a straight upright pole, with adjustable foot pads at both ends of the bottom pole; The lower end has internal screw holes, and the lower end is combined with the protruding column of the bottom rod. The upper end can be assembled with a joint piece, which is a rectangular piece with small pieces extending on both sides. There are several positioning holes on the joint piece to combine with another rectangular piece; The crossbar has a hollow bottom with an open long hole, and two small blocking pieces are folded upwards from the bottom to allow the U-shaped piece to enter the interior of the crossbar and be restricted by the two small blocking pieces,






冂型片体上固设数螺帽及定位孔，与结合片之定位孔穿设螺杆结合，该座椅具有两Ｌ型支杆、一底板及一凵型片，该座椅之座垫下方设数凸块与底板以螺丝结合，底板两侧为Ｌ型支杆，Ｌ型支杆端为中空插槽可入一插块，座椅之椅背两侧具有插片，插块可结合插片，该凵型片上端两侧延伸水平片，水平片以螺杆结合底板下，而凵型片则供横杆置入其内；于该底板一侧Ｌ型支杆可受一夹块以螺杆固定，该夹块上端定位一弯曲之扶手； 据此，藉由冂型片体与结合片稳固结合，该横杆可以架设于脚架上，而凵型片结合于底板，以达到结构稳定。理性的文字可能很多人不喜欢看，但是如果你想了解排椅的征和结构，就请你收藏我们的站，因为我们这是专门而又专业性的网站，我们电动桌厂家将继续为你讲解电动桌的其他征！
There are several nuts and positioning holes fixed on the square shaped plate body, which are connected to the positioning holes of the joint plate by screws. The seat has two L-shaped support rods, a bottom plate, and a square shaped plate. There are several protruding blocks under the seat cushion of the seat that are connected to the bottom plate by screws. The two sides of the bottom plate are L-shaped support rods, and the end of the L-shaped support rod is a hollow slot that can be inserted into a block. There are insertion pieces on both sides of the seat back that can be connected to the insertion pieces. The upper end of the square shaped plate extends horizontally on both sides, and the horizontal piece is connected to the bottom plate by screws. The square shaped plate is used for inserting the horizontal bar into it; The L-shaped support rod on one side of the bottom plate can be fixed by a clamp block with a screw, and a curved armrest is positioned at the upper end of the clamp block; Based on this, the crossbar can be mounted on a tripod by firmly combining the blade body with the bonding plate, while the blade body is bonded to the bottom plate to achieve structural stability. Rational text may not be appealing to many people, but if you want to learn about the characteristics and structure of row chairs, please bookmark our website because it is a specialized and professional website. Our electric table manufacturer will continue to explain other characteristics of electric tables to you!