电动餐桌结构说明，电动餐桌材质区别

电动餐桌结构说明，电动餐桌材质区别详细说明

电动餐桌结构说明，电动餐桌材质区别
Explanation of the structure of electric dining tables and differences in the materials used for electric dining tables



电动餐桌设计前言：
Introduction to Electric Dining Table Design:
电动餐桌是通过让餐桌面进行自动旋转，达到让就餐客人夹菜方便的作用，电动餐桌相关说明在以前发布的文章也有详细说明，可以进行阅读，本文主要讲述电动餐桌使用的餐桌说明。
Electric dining tables are designed to automatically rotate the dining table, making it convenient for guests to pick up food. The relevant instructions for electric dining tables have also been detailed in previous articles, which can be read. This article mainly discusses the table instructions used for electric dining tables.
自动餐桌的餐桌通常有以下几种：
There are usually several types of automatic dining tables:
1、橡木板。质量好，硬度高，坚实耐用，木质感强。不足之处是不适宜北方地区，是冬天常用暖气和空调，容易热胀冷缩产生裂纹。
1. Oak board. Good quality, high hardness, solid and durable, with strong woodiness. The disadvantage is that it is not suitable for northern areas. It is commonly used for heating and air conditioning in winter, which is prone to cracks caused by thermal expansion.




2、多层实木板。其造价略低于三聚青胺多层板，也是餐桌材质的不错选择，但是油漆表面，耐磨度不及三聚青胺多层板。
2. Multi layer solid wood board. Its cost is slightly lower than that of melamine multilayer board, and it is also a good choice for dining table materials. However, the paint surface and wear resistance are not as good as melamine multilayer board.
3、密度板。这是比较差的一处，造价低廉，实际就是纸浆打碎后再用胶合剂高温热压而成的板材，此板材不含任何木质成份，虽然平整度较好，但表面全是棕色的纸质纤维结构。多数厂家为了节约成本就在它表面贴一层天然木皮，造成一种实木纹的感觉。
3. Density board. This is a relatively poor aspect, with low cost. In fact, it is a board made by crushing pulp and then hot pressing it with adhesive at high temperature. This board does not contain any wooden components, and although it has good flatness, the surface is entirely made of brown paper fiber structure. Most manufacturers apply a layer of natural wood veneer on its surface to save costs, creating a solid wood grain feeling.
4、大理石台面。耐磨，抗划伤，耐油水，也是很好奇的餐桌材质。但是注意的是大理石台面有人造和天然之分，人造大理石是在很差的黑青石表面贴一层仿大理石木纹纸，有的还是拼接石头，其后在表面喷光聚脂漆。使用一段时间后，纸皮就会脱落，而拼接过的石头稍微用力按一下会容易断裂。
4. Marble countertop. Durable, scratch resistant, oil and water resistant, and also a curious dining table material. However, it should be noted that there is a distinction between artificial and natural marble countertops. Artificial marble is made by pasting a layer of imitation marble wood grain paper on the poor surface of black bluestone, and some are still spliced with stones, followed by spraying glossy polyester paint on the surface. After using it for a period of time, the paper will peel off, and the spliced stones can easily break if pressed lightly.




木质电动餐桌的保养
Maintenance of wooden electric dining tables
木质电动餐桌适宜放置在温湿度合宜的环境里，同时须避免饮料、化学药剂或过热的物体放置在表面，以免损伤木质表面的天然色泽。当污垢较多时，可以使用稀释过的中性清洁剂佐以温水擦拭一次，再以清水擦拭，记得以柔软的干布擦去残留水渍，待完全擦净后，再使用保养蜡磨亮。
Wooden electric dining tables are suitable for placement in an environment with appropriate temperature and humidity, while avoiding placing beverages, chemicals, or overheated objects on the surface to avoid damaging the natural color of the wooden surface. When there is a lot of dirt, you can use a diluted neutral cleaning agent and warm water to wipe it once, and then wipe it with clean water. Remember to use a soft dry cloth to wipe off residual water stains, and after completely wiping it off, use maintenance wax to polish it.
电动餐桌使用场所
Electric dining table usage area
自动餐桌一般常见于宾馆、饭店等服务场所，适宜多人就餐，但是随着人们对生活品味的追求，自动餐桌现在也进入了普通家庭。电动餐桌和普通的餐桌在材质选用上基本相同，所以在选购电动餐桌时，材质上按普通餐桌标准选择就可以，但要在电机上多留心一些。
Automatic dining tables are generally common in service places such as hotels and restaurants, suitable for multiple people to eat. However, with people's pursuit of lifestyle taste, automatic dining tables have now entered ordinary households. Electric dining tables and regular dining tables have basically the same material selection, so when choosing an electric dining table, the material selection should follow the standard for regular dining tables, but pay more attention to the motor.