儿童餐桌椅材料和涂料简单介绍：

儿童餐桌椅材料和涂料简单介绍：详细说明

儿童餐桌椅材料和涂料简单介绍：
A brief introduction to materials and coatings for children's dining tables and chairs:








儿童餐椅整体材料选用松木，为速生材。现在市场上面儿童实木电动餐桌多选用松木作为原材料。实木电动餐桌相较板式电动餐桌，更加环保。只是在实木清油涂饰时有少部分甲醛释放，而板式电动餐桌内部及表层使用胶黏剂较多，对于儿童较为脆弱的体质而言是为不利的。松木在实木家族中属于速生材，原材料生长速度很快。因儿童电动餐桌在电动餐桌制造范畴内属于较为殊的一类电动餐桌。伴随着儿童的成长，更新淘汰的频率较高。
The overall material of the children's dining chair is pine wood, which is a fast-growing material. Nowadays, many children's solid wood electric dining tables on the market use pine wood as the raw material. Solid wood electric dining tables are more environmentally friendly compared to panel electric dining tables. Only a small amount of formaldehyde is released when solid wood is coated with clear oil, while the use of adhesives on the interior and surface of panel electric dining tables is more common, which is unfavorable for children's more fragile physique. Pine belongs to the fast-growing wood family, and its raw materials grow very quickly. Because children's electric dining tables belong to a relatively different category of electric dining tables in the field of electric dining table manufacturing. With the growth of children, the frequency of updates and elimination is relatively high.






所以选择使用速生木材作为电动餐桌原材料是十分必要，十分环保的。在速生材中，松木纹理鲜明美观，而且其中有松脂的香味。这也是选择该树种的重要原因。为了能够充分显示松木美丽的纹理，餐椅选用的是清油涂饰，再进行砂光。当然为了刺激儿童的对于色彩的感知能力，也可以选择混油涂料。餐椅整体采用实木榫结合的连接方式，部分衔接采用圆棒榫。前腿与后退：前腿与后腿在配料时由于造型的缘故采用曲线的锯解方式。之所以没有选择前后腿整体配料是因为考虑到餐椅的使用强度，整体配料会让椅子的强度变小，很容易从端部裂开。所以在前后腿衔接的端采用圆棒榫的连接方式。
So choosing to use fast-growing wood as the raw material for electric dining tables is very necessary and environmentally friendly. In fast-growing wood, pine wood has a distinct and beautiful texture, and there is a fragrance of pine resin in it. This is also an important reason for choosing this tree species. In order to fully display the beautiful texture of pine wood, the dining chairs are coated with clear oil and then sanded. Of course, to stimulate children's ability to perceive colors, mixed oil coatings can also be chosen. The dining chair adopts a solid wood tenon joint connection method as a whole, and some connections are made with round bar tenons. Front and back legs: The front and back legs are sawn together in a curved manner due to their shape during ingredient preparation. The reason for not choosing the overall ingredient for the front and rear legs is because considering the strength of the dining chair, the overall ingredient will reduce the strength of the chair and easily crack from the end. So, a round tenon joint is used at the end where the front and rear legs are connected.








在前后椅腿处各开圆棒榫孔，在装配时，采用两个圆棒榫连接装配。护栏：护栏和两侧的前腿采用榫连接。与传统榫连接不同的是，为保证儿童使用的便捷，护栏是可以随意安装和取下的。在两侧的前腿上开适合大小的榫槽，然后在护栏端头开榫。保证护栏可以随使用的需要，从上部划开。靠背：靠背与两侧的后腿采用传统榫卯结构，在后腿开榫槽，靠背板两侧各留两个榫头，保证连接的强度。座面：该座椅由于设计的考虑和使用的要求，共有两个座面。这两个座面都采用可以活动的榫卯结构。以保证座椅随儿童生长而不断旋转的要求。所以在与座面相连接两侧的前后椅腿上开槽，在两层椅面两端留有榫头，保证椅面可以正常滑入滑出。
Open circular tenon holes at the front and rear chair legs, and use two circular tenon connections during assembly. Guardrail: The guardrail and the front legs on both sides are connected by tenons. Unlike traditional tenon connections, guardrails can be installed and removed freely to ensure the convenience of children's use. Make appropriate mortise and tenon grooves on the front legs on both sides, and then tenon the ends of the guardrail. Ensure that the guardrail can be cut open from the top as needed for use. Backrest: The backrest and the rear legs on both sides adopt a traditional mortise and tenon structure, with mortise and tenon grooves on the rear legs. Two mortise and tenon joints are left on each side of the backrest to ensure the strength of the connection. Seat surface: Due to design considerations and usage requirements, this seat has two seat surfaces. Both of these seating surfaces adopt movable mortise and tenon structures. To ensure that the seat rotates continuously with the growth of children. So, slots are made on the front and rear legs connected to the seat surface, and tenons are left at both ends of the two layers of seat surface to ensure that the seat surface can slide in and out normally.