儿童餐桌椅整体工艺流程： The overall process flow

儿童餐桌椅整体工艺流程： The overall process flow详细说明

儿童餐桌椅整体工艺流程：
The overall process flow of children's dining tables and chairs:






整体工艺流程：板材;画线;横截;锯弯;毛料;基准面加工;相对面加工;精截;净料;加工榫头;加工榫槽;;打孔;加工型面;表面修正;涂饰;装配板材：为提高出材率除前后椅腿采用纯松木之外，其余板材可以采用松木集成材，提高松木利用率，也可以保证使用强度。画线：针对曲线造型的椅腿，加工设备采用细木工带锯，加工余量为3mm；其余方形板材均采用圆锯机横截，加工余量3mm。
Overall process flow: sheet metal; Draw lines; Cross section; Saw bending; Wool material; Reference surface machining; Relative surface processing; Fine cutting; Clean material; Processing tenons and tenons; Processing tenon and groove;; Punching holes; Processing profile; Surface correction; Coating; Assembly board: In order to improve the yield, except for the front and rear chair legs using pure pine wood, other boards can be made of integrated pine wood to improve the utilization rate of pine wood and ensure the strength of use. Draw lines: For chair legs with curved shapes, the processing equipment uses a fine woodworking band saw with a machining allowance of 3mm; The remaining square panels are cut horizontally using a circular saw machine with a machining allowance of 3mm.






加工榫头：由于本儿童椅各零件连接榫头均比较方正，所以榫头加工利用横截锯机，在长度方向加工余量5mm。加工榫槽：按照开槽位置画线后，利用长方榫头开槽机进行开榫槽的处理。打孔：前后椅腿连接采用的圆棒榫孔以及前腿与前撑相连接采用的不锈钢前撑均需要利用单轴钻孔机进行钻空处理。表面修整：为保证各零件表面的光洁程度，必须要进行各个基准面的砂光，采用宽带砂光机完成工作。
Processing tenon: Due to the fact that the tenon joints of each component of this children's chair are relatively square, the tenon joints are processed using a cross cutting saw machine with a machining allowance of 5mm in the length direction. Processing tenon and groove: After drawing lines according to the groove position, use a rectangular tenon and groove machine to process the tenon and groove. Punching: The circular tenon holes used for connecting the front and rear chair legs, as well as the stainless steel front supports used for connecting the front legs to the front supports, all require drilling with a single axis drilling machine. Surface finishing: To ensure the smoothness of the surface of each component, it is necessary to sand each reference surface using a broadband sanding machine to complete the work.






涂饰：各零件均采用清油涂饰的方式，需在进行表面砂光，保证各零件表面平整光洁后方可进行涂饰。为保证涂饰质量与日后的保养维护。涂饰需3遍以上。装配：儿童餐椅的装配过程比较简单，首先把前腿后腿用圆棒榫和旁撑连接成型，然后装配靠背板和后撑连接。后就可以根据自己使用的需要安装两个座面了。
Coating: All parts are coated with clear oil, and surface sanding is required to ensure that the surface of each part is flat and smooth before coating. To ensure the quality of coating and future maintenance. Coating needs to be done three or more times. Assembly: The assembly process of the children's dining chair is relatively simple. First, connect the front and rear legs with a round tenon and side brace to form a shape, and then assemble the backrest and rear brace to connect. Then you can install two seat surfaces according to your own needs.