如何选购自动餐桌椅？ How to choose automatic dining

如何选购自动餐桌椅？ How to choose automatic dining详细说明

如何选购自动餐桌椅？
How to choose automatic dining tables and chairs?








现在市场上自动餐桌椅款式繁多，但是要选购为适宜的学校自动餐桌椅，主要还是以连体款式餐桌椅为主，而且以四人连体至六人位连体为恰当，单体餐桌过大会影响整个餐厅布局，对于餐厅的整洁，清洁，用餐秩序都有不良影响。就学校食堂而言，四人位连体餐桌椅依然是合理的选择。
There are many styles of automatic dining tables and chairs on the market now, but when it comes to choosing suitable school automatic dining tables and chairs, the main focus is on connected dining tables and chairs, and it is appropriate to use four to six connected dining tables. A single dining table can affect the overall layout of the restaurant, and have a negative impact on the cleanliness, cleanliness, and dining order of the restaurant. As far as the school cafeteria is concerned, a four person conjoined dining table and chair is still a reasonable choice.





今天餐桌椅厂家总结了四点购买自动餐桌椅值得注意的地方：1、餐桌椅的表饰面质量：钢制部位的表面饰面是否光滑平整，无涂层或镀层脱落，无锈迹;台面表面平整光滑，无划痕等缺陷。2、餐桌椅的主要尺寸：行业标准规定餐桌的高度为700mm-760mm;餐椅的座高为400mm-460mm;软面椅座高为400mm-460mm。3、餐桌椅台面材质的要求：
Today, the dining table and chair manufacturer summarized four points worth paying attention to when purchasing automatic dining tables and chairs: 1. The surface finish quality of the dining table and chairs: whether the surface finish of the steel parts is smooth and flat, without coating or plating peeling off, and without rust; The surface of the countertop is flat and smooth, without defects such as scratches. 2. The main dimensions of dining tables and chairs: According to industry standards, the height of the dining table is 700mm-760mm; The seat height of the dining chair is 400mm-460mm; The height of the soft faced chair seat is 400mm-460mm. 3. Requirements for material of dining table and chair countertops:






桌面的钢化玻璃台面厚度一般应大于等于12mm，防火板厚度一般是25mm，台面的端边、磨边是否平直光滑无钝角、玻璃无划痕、缺角等。4、餐桌椅制作质量：检查钢木底架的焊接是否有脱焊虚焊裂缝现象;螺钉或铆钉连接部位是否松动;钢管架与台面连接是否牢固无松动。自动餐桌椅，由于其使用场所和人群数量的殊性，选购的时候要考虑全面了。
The thickness of the tempered glass countertop of the desktop should generally be greater than or equal to 12mm, and the thickness of the fireproof board is generally 25mm. The end edges and ground edges of the countertop should be straight and smooth without obtuse angles, and the glass should be free of scratches, missing corners, etc. 4. Quality of dining table and chair production: Check whether there is any detachment, virtual welding, or crack phenomenon in the welding of the steel and wood base frame; Whether the connection parts of screws or rivets are loose; Check if the connection between the steel pipe rack and the countertop is firm and not loose. Automatic dining tables and chairs, due to their differences in usage and the number of people, should be carefully considered when choosing.