新中式20人的电动桌支架等分 自助火锅餐桌价格

 

 

随着生活质量的提高，目前的家装需求不仅注重功能和设计，而且环保也逐渐成为消费者关注的主要问题。关于板材，木门定制网络小编帮你分析如何选择电动餐桌板材。

With the improvement of quality of life, the current demand for home decoration not only focuses on functionality and design, but also environmental proction has graally become a major concern for consumers. Regar boards, the customized network editor for wooden doors will help you analyze how to choose electric dining table boards.

(1)实木颗粒板，其实就是利用刨花板技术生产的板材，可以看作是属于均质刨花板的一种刨花板。均质刨花板的学名是定向结构刨花板。

 

 

 

(1) Solid wood particle board is actually a kind of board proced by particle board chnology, which can be regarded as a kind of particle board belonging to homogeneous particle board. The scientific name of homogeneous particle board is oriend structure particle board.

(2)刨花板作为高档环保基材，被欧美电动餐桌厂商广泛使用，国内高档板式电动餐桌市场也开始大面积采用这种板材。

(2) As a high-end environmental proction substra, particle board is widely used by European and American electric table manufacturers, and the domestic high-end pla electric table market has also begun to use this kind of board in a large area.

(3)多层实木板材通过冷压、热压、砂光、固化等多种工艺制成。以交错排列的多层胶合板为基材，以优质实木单板或工艺木为面料。

 

 

 

(3) Multi layer solid wood panels are made through various processes such as cold pressing, hot pressing, san, and curing. Using staggered multi-layer plywood as the substra and high-quality solid wood veneer or craft wood as the fabric.

(4)卡朋板(俗称大芯板)是实木芯胶合板，垂直方向(由芯板方向区分)抗折抗压强度较差，但横向抗折抗压强度较高。目前市面上大部分细木工板都是实心板，胶合，两面磨砂，五层，是目前常用的板材之一。

(4) Carpen  board (commonly known as large core board) is a solid wood core plywood with poor flexural and compressive strength in the vertical direction (distinguished by the direction of the core board), but higher transverse flexural and compressive strength. At present, most of the joinery boards on the market are solid boards, glued, sanded on both sides, and five layers, which are currently one of the commonly used boards.

 

 

 

(5)刨花板是由各种树枝和芽、小直径木材、速生木材、木屑等切割而成的一种人造板。制成一定规格的碎片，干燥，与橡胶化合物、硬化剂、防水剂等混合。在一定的温度和压力下压制。之所以叫刨花板，是因为它的截面类似蜂窝形状。

(5) Particle board is a kind of man-made board cut from various branches and buds, small diamer wood, fast-growing wood, wood chips, etc. Make fragments of certain specifications, dry them, and mix them with rubber compounds, hardeners, warproofing agents, etc. Press at a certain mperature and pressure. The reason why it is called particle board is that its cross section is similar to the honeycomb shape.

(6)纤维板由植物纤维经热磨、上浆、铺装、热压制成。纤维板分密度，密度在450 kg/m3以下的为低密度纤维板；

(6) Fiberboard is made of plant fibers through hot grin, sizing, paving, and hot pressing. Fiberboard with a density of less than 450 kg/m3 is classified as low-density fiberboard;

(7)指接板，又称集成板、集成材、指接材，是由小块加工好的实木像“手指”一样拼接而成的板材。因为木板之间有锯齿状的接口，类似于两只手和手指的交叉对接，所以叫指接板。

(7) Finger joint board, also known as ingrad board, ingrad marial, or finger joint marial, is a board made by splicing small pieces of processed solid wood like "fingers". Because there is a serrad inrface between the wooden boards, similar to the cross docking of two hands and fingers, it is called a finger joint board.