实木电动餐桌圆形转盘 佛山红木电动餐台厂家

电动餐桌锅使用原理的工作原理电动餐桌锅使用原理的工作原理按照步骤来大致分为两种：吸和净化。

The working principle of electric dining table pot can be roughly divided into two types according to the steps: suction and purification.

一、吸原理吸的工作原理主要是采用深井下排或侧吸下排，下排风产生流体负压的原理，让控制器魔力般的往下吸走，再也看不到控制器四处升腾的现象。吸效果图如下：

1、 The working principle of suction is mainly based on the principle of deep well discharge or side suction discharge, and the principle of fluid negative pressure generated by the exhaust air, allowing the controller to magically suck down and no longer see the controller rising around. The suction effect diagram is as follows:

 

 

 

二、净化原理1、物理净化主要由液沫分离、旋流脱水、控制器屏蔽、筛网过滤、冷凝2、化学净化由光解催化、消毒碳化（1）液沫分离（喷淋过滤）：通过抽风机收集控制器后使用喷淋的方式与控制器接触分解这些有害的油雾，将控制器进一步净化。（2）旋流脱水：控制器通过净化设备的时候，产生旋流，使控制器中的水雾在其作用下，被甩向管壁，从而达到控制器快速分离的目的。

2、 Purification principle: 1. Physical purification mainly consists of liquid foam separation, cyclone dehydration, controller shielding, screen filtration, condensation. 2. Chemical purification consists of photolysis catalysis, disinfection and carbonization. (1) Liquid foam separation (spray filtration): After collecting the controller through an exhaust fan, the controller is sprayed to decompose these harmful oil mist, further purifying the controller. (2) Swirl dehydration: When the controller passes through the purification equipment, a vortex is generated, causing the water mist in the controller to be thrown towards the pipe wall under its action, thereby achieving the goal of rapid separation of the controller.

 

 

 

 

（3）控制器屏蔽：在离心力的作用下，风柜中的控制器被甩出风轮形成油雾分离（4）光解催化（光触媒技术）：以质灯管发出的高能紫外线把控制器分子降解为微小的油脂分子，这些油脂分子一部分生成二氧化碳和水，少部分会形成细小的固体微粒。（5）筛网过滤(活性炭过滤）：筛网过滤主要为活性炭吸附，活性炭占地面积小，净化效率较高，能有效去除控制器、异味、CO、致癌物等有害物质。

(3) Controller shielding: Under the action of centrifugal force, the controller in the wind cabinet is thrown out of the wind wheel to form oil mist separation. (4) Photolysis catalysis (photocatalyst technology): The high-energy ultraviolet light emitted by the quality lamp tube degrades the controller molecules into small oil molecules, some of which generate carbon dioxide and water, while a small part forms small solid particles. (5) Screen filtration (activated carbon filtration): screen filtration is mainly activated carbon adsorption. Activated carbon occupies a small area and has high purification efficiency, which can effectively remove harmful substances such as controller, odor, CO, carcinogen, etc.

 

 

（6）冷凝：控制器经过控制器冷凝装置进行冷凝过滤处理，使排到室外的空气雾含量进一步降低（7）消毒碳化：经过消毒碳化后，会减少控制器在设备上的粘附聚集，进一步提高了设备的处理效率，同时延长了设备请里维护周期。下图为5层净化电动餐桌锅使用原理示意图：目前市场上用的多的主要由两种：光解催化和筛网过滤，但是往往采用以上任何一种单一的净化方式的话，净化效果往往很不理想。至少结合以上五种净化方式，才能达到控制器净化的90%以上，以上八（1+7）种全部采用方可达到99%的除效果，目前能达到这种技术的唯有韩博锅锅火。

(6) Condensation: The controller undergoes condensation filtration treatment through the controller condensation device, further reducing the amount of air mist discharged to the outdoors. (7) Disinfection carbonization: After disinfection carbonization, the adhesion and aggregation of the controller on the equipment are reduced, further improving the processing efficiency of the equipment and extending the maintenance cycle of the equipment. The following figure is a schematic diagram of the use principle of a 5-layer purification electric dining table pot: currently, there are mainly two types used in the market: photolysis catalysis and screen filtration. However, if any of the above single purification methods are used, the purification effect is often not ideal. At least combining the above five purification methods can achieve over 90% purification of the controller, and using all eight (1+7) methods can achieve a 99% removal effect. Currently, the only one that can achieve this technology is Han Bo Guo Huo.