电动升降桌双层转动转速 多功能电动餐台火锅桌

定做要清楚哪些流程？-

What are the clear processes for customization-

现在越来越流行，随着时代的发展，越来越多的火锅店都随之更新换代，也成众多火锅店。

Nowadays, it is becoming more and more popular. With the development of the times, more and more hotpot restaurants have been updated and replaced, becoming numerous hotpot restaurants.

下面厂家就来带大家解下定做时要解哪些流程。

Below, the manufacturer will take you through the process of customization.

1、找信誉好的公司做有的人对定做的行情不熟悉，加上也没有认真筛选出合适的品牌，导致定做的产品有很多不足，例如质量不过关，款式和设想的有明显出入，以及协商交货的工期不同等等。所以，定做之前要找有信誉的公司，在行业的口碑要好。公司的规模也是大家要考虑的因素之一，通常这样的公司才能够一次性进行大批量的生产，满足客户的需求。

 

 

 

 

 

1. Some people are not familiar with the customized market and have not carefully selected suitable brands, which leads to many shortcomings in the customized products, such as poor quality, obvious differences in style and design, and different delivery schedules negotiated. So, before customizing, it is important to find a reputable company with a good reputation in the industry. The size of a company is also one of the factors that everyone needs to consider. Usually, such a company can produce in large quantities at once to meet the needs of customers.

2、批量生产前要确认火锅桌生产工厂在按照客户的需求会设计出的原型，画好以后上色并提供样张给客户确认。这个时候，客户要认真核对之前给厂商提的要求。如果有实力的厂商还会直接做一个3D模型，或者做一台样机出来，客户可以咨询一下工厂是否能够提供相关的服务。如果不行，就要在样张上面反复确认好，要十分满意的情况下才让对方开工制作，尽可能将想要的效果还原出来。

 

 

 

 

2. Before mass production, it is necessary to confirm that the hot pot table production factory will design a prototype according to customer needs, paint it, and provide a sample to the customer for confirmation. At this point, the customer needs to carefully verify the requirements previously made to the manufacturer. If a strong manufacturer can directly create a 3D model or a prototype, customers can consult with the factory to see if they can provide relevant services. If it doesn't work, you need to repeatedly confirm on the sample and only let the other party start production when they are very satisfied, trying to restore the desired effect as much as possible.

 

 

 

 

当定做好产品后，验收的工作不能马虎事。一些细节上面的要尤为注意，很多人就是忽略这些部分，才导致更加严重的问题。抽查部分时候能够正常的打开工作之外，还要对其进行测试。

After the product is ready, the acceptance work cannot be done carelessly. Special attention should be paid to some details, as many people overlook these parts to lead to more serious problems. In addition to being able to open and work normally during spot checks, it is also necessary to test it.