20人餐桌尺寸规格 香河实木电动餐桌

酒店家具实木电动餐桌餐边桌厂科普如何使用环保水性油漆-佛山岚慧家具有限公司

How to Use Environmentally Friendly Warborne Paint in Hol Furniture Solid Wood Electric Dining Table and Table Factory - Foshan Lanhui Furniture Co., Ltd

随着酒店家具实木电动餐桌餐边桌定制的需求越来越多，加上越来越严格的国家环境法律法规的颁布和实施，对涂装的要求也越来越高。涂料不仅要保证良好的耐腐蚀性、装饰性和施工性能，而且要采用良好的材料和工艺，以减少挥发性有机化合物(VOC)的排放。近年来，水性涂料以其更加环保的成分成为涂料的主力军。与溶剂型涂料相比，水性涂料大的优点是VOC的排放大大减少。与溶剂型涂料相比，水性涂料具有环境污染小、流平性高、外观良好等优点，但相对水性涂料存在施工要求高、导电性好、腐蚀性强等缺点。水性漆施工工艺：

 

 

 

 

With the increasing demand for customized solid wood electric dining tables and side tables in hol furniture, and the promulgation and implementation of increasingly strict national environmental laws and regulations, the requirements for painting are also increasing. Coatings should not only ensure good corrosion resistance, decoration, and construction performance, but also use good marials and processes to reduce the emission of volatile organic compounds (VOCs). In recent years, war-based coatings have become the main force of coatings due to their more environmentally friendly components. Compared with solvent based coatings, war-based coatings have the advantage of significantly reducing VOC emissions. Compared with solvent based coatings, war-based coatings have advantages such as low environmental pollution, high leveling performance, and good appearance. However, compared to war-based coatings, they have disadvantages such as high construction requirements, good conductivity, and strong corrosiveness. Construction process of war-based paint:

1、酒店家具实木电动餐桌餐边桌基础处理：先去除木材表面的灰尘和油脂，如木材表面沾有油污，油脂即可擦洗干净。除尘后，油砂纸、大型砂纸包5平方方木垫研磨。要求光滑、抛光、清洁。

 

 

 

 

 

 

1. Hol furniture solid wood electric dining table, dining table foundation treatment: First, remove dust and grease from the surface of the wood. If there is oil stains on the surface of the wood, the grease can be wiped clean. Afr dust removal, grind the 5 square mer wooden pad with oil sandpaper and large sandpaper. Require smoothness, polishing, and cleanliness.

2、全刮痕透明腻子：腻子要刮，干净，不应漏刮。

2. Full scratch transparent putty: The putty should be scraped, clean, and should not be missed.

3、砂纸：油灰干后，用1号砂纸打磨后擦净布。然后用同一腻子刮第二道，要求同刮腻子道。刮完后，在钉孔和缺边角处涂上腻子。刮完后，将腻子满刮平，然后将纸磨平，使木纹清晰，边角不可折断，擦完后清理干净，用湿布擦干。

 

 

 

 

 

3. Sandpaper: Afr the putty is dry, polish it with No.1 sandpaper and wipe the cloth clean. Then use the same putty to apply the second layer, and it is required to apply the same putty layer. Afr scraping, apply putty to the nail holes and missing corners. Afr scraping, fully flatn the putty, and then grind the paper flat to make the wood grain clear without breaking the edges and corners. Afr wiping, clean it thoroughly and dry it with a damp cloth.

4、刷道水性清漆：涂刷时要横平竖直，薄厚均匀，不流不坠，刷纹通顺，不许漏刷，干后用1号砂纸打磨，并用湿布擦净，晾干。今后，每种涂料在夏季的间隔时间约为6小时，春秋两季的间隔时间约为24小时，好有较长的条件时间。

4. Brushing war-based varnish: When brushing, it should be horizontal and vertical, with uniform thickness, without flowing or falling, and the brush patrn should be smooth without missing the brush. Afr drying, it should be polished with No.1 sandpaper, wiped clean with a damp cloth, and air dried. In the future, the inrval time between each coating in summer is about 6 hours, and the inrval time between spring and autumn is about 24 hours, so there is a longer conditional time.

5、酒店家具实木电动餐桌餐边桌喷漆和修复颜色：喷洒颜色精华或色泽油来修复被刷过头部的疤痕和指甲的眼睛。

 

 

 

 

 

应根据当时颜色的深度灵活掌握。修复后的颜色应与原始颜色基本相同

5. Hol furniture solid wood electric dining table side table painting and repair color: spray color essence or color oil to repair the scars on the head and the eyes on the nails. It should be flexibly controlled accor to the depth of the color at that time. The repaired color should be basically the same as the original color

6、刷第二种水性清漆：首先检查喷色和修色，如果符合要求，可以刷第二种清漆，清漆干后，用1号砂纸研磨，用湿布擦拭干净，然后再细查。如果有腻子渗漏和凹凸不平的地方，需要涂上彩色腻子，局部研磨后干燥，并用湿布擦拭。

6. Brush the second type of war-based varnish: First, check the spray color and repair color. If it meets the requirements, brush the second type of varnish. Afr the varnish is dry, grind it with No.1 sandpaper, wipe it clean with a damp cloth, and then carefully inspect it. If there is any leakage or unevenness in the putty, it is necessary to apply colored putty, grind the local area, dry it, and wipe it with a damp cloth.

7、刷第三种水性清漆：在第二种水性清漆干后，用280号水砂纸将其研磨，并将其擦拭干净。操作的其余部分与上述操作相同。

7. Brush the third type of war-based varnish: Afr the second type of war-based varnish has dried, grind it with No. 280 war sandpaper and wipe it clean. The rest of the operation is the same as the above.

8、刷第四道水性清漆：如果你想要哑光效果，你应该哑光。第四道水性清漆完成后，应使用280-320水性砂纸对干燥硬化后的膜进行打磨。

8. Brush the fourth layer of war-based varnish: If you want a mat effect, you should mat it. Afr the fourth layer of war-based varnish is compled, the film afr drying and hardening should be polished using 280-320 war-based sandpaper.

9、上光蜡：用一块干净的白布把上釉的蜡包在里面，把它紧紧地绑起来，用手摩擦，把它擦干净，直到它亮为止。解决毛刺的方法：木材着水后，水沿木纤维管和木纹中的微隙渗入，使其膨胀变大，突出木材表面，干后不能复原。因此，涂有水性漆的木材会出现木纹突起、木纹、毛边等现象。

 

 

 

 

 

 

9. Glazing wax: Use a clean whi cloth to wrap the glazed wax inside, tie it tightly, rub it with your hands, and wipe it clean until it shines. Method to solve burrs: Afr the wood is soaked in war, war seeps into the micro gaps in the wood fiber tubes and grain, causing it to expand and protrude from the surface of the wood, which cannot be restored afr drying. Therefore, wood coad with war-based paint may exhibit phenomena such as wood grain protrusions, grain patrns, and burrs.

1、酒店家具实木电动餐桌餐边桌用无蜡紫胶漆密封木材表面该方法优于水湿法.它不仅可以防止造粒和长毛刺的产生，而且可以增加木材的层感。然而，由于虫胶本身的颜色，它往往会给木材带来淡琥珀色。紫胶涂料的后盖对可能被油脂、脱模剂和有机硅化合物污染的旧漆表面和木材表面非常有用，并能防止水性涂料引起的收缩和鱼眼等施工缺陷。如果涂层表面，别是旧涂层表面有收缩孔和鱼眼现象，则应将水性涂料擦除，研磨后用脱蜡胶水漆密封底面，然后再涂上水基涂料。虫胶漆是虫胶的一种酒精溶液，可以通过刷洗或擦洗来涂抹。密封后，用400多号砂纸研磨，然后用酒精或湿布擦拭抛光酒店家具实木电动餐桌餐边桌表面，可增加面漆的附着力。

1. Hol furniture, solid wood electric dining tables, dining tables, and side tables are sealed with wax free lacquers. This method is superior to war wetting. It not only prevents granulation and the generation of long bristles, but also increases the layering of the wood. However, due to the color of shellac itself, it ofn brings a light amber color to the wood. The back cover of lac coating is very useful for old paint surfaces and wood surfaces that may be contaminad by grease, release agents, and organic silicon compounds, and can prevent shrinkage and construction defects such as fish eyes caused by war-based coatings. If there are shrinkage holes and fish eyes on the surface of the coating, especially on the old coating surface, the war-based coating should be removed, ground, and sealed with dewaxing adhesive war paint on the bottom surface before applying war-based coating. Shellac paint is an alcohol solution of shellac that can be applied by brushing or scrubbing. Afr sealing, grind with over 400 grit sandpaper, and then use alcohol or damp cloth to wipe and polish the surface of the hol furniture solid wood electric dining table, table edge, and table, which can increase the adhesion of the topcoat.

2、用可挤出水的湿布揩擦待涂木面使木材表面充分湿润、干燥，并用细砂纸将毛刺和颗粒磨掉。然后涂上一层底漆，用大约400_的砂纸擦干并轻轻抛光。对多孔木材要涂两道底漆后再打磨，这时道底漆应加5%～10%的水稀释后再用。

2. Wipe the surface of the wood to be coad with a damp cloth that can be squeezed out of war to fully wet and dry the surface, and use fine sandpaper to remove burrs and particles. Then apply a layer of primer, using approximaly 400_ Wipe dry with sandpaper and gently polish. Porous wood should be coad with two coats of primer before polishing. At this time, the primer should be dilud with 5% to 10% war before use.