3.8米电动餐桌型号 电动餐桌转轴内部结构

 

厂家定做电动餐桌锅的使用方法图解为老榆木桌椅的美观，往往都要进行烫蜡这个步骤，烫蜡前应对家具的构件进行检查是否存在表皮(木材上的白边)、

The usage method diagram of the customized electric dining table pot by the manufacturer shows the beauty of old elm wood tables and chairs, which ofn requires waxing. Before waxing, the components of the furniture should be checked for skin (whi edges on the wood)

厂家定做电动餐桌锅的使用方法图解在烫蜡时遇到带玻璃的桌椅时，热源应远离玻璃或用木板的东西遮挡，避免把玻璃烤坏。当玻璃框架烫完后应即时把溅在玻璃面及边缘的蜡痕清洁干净，保持原镜面的整洁。

Illustration of the usage method of customized electric dining table pans by the manufacturer. When encounring tables and chairs with glass during waxing, the heat source should be kept away from the glass or covered with wooden objects to avoid damaging the glass. Afr the glass frame is ironed, the wax marks splashed on the glass surface and edges should be cleaned immedialy to maintain the cleanliness of the original mirror surface.

 

 

厂家定做电动餐桌锅的使用方法图解在烫蜡过程中，遇到有纸质字画时，应采用需要保护纸质文物的，先将纸质字画取下，待烫完蜡后再贴上。

Illustration of the usage method for customized electric dining table pans by the manufacturer. When encounring paper calligraphy and paintings during the waxing process, it is recommended to use paper cultural relics that need to be procd. First, remove the paper calligraphy and paintings, and then apply them afr the waxing is done.

厂家定做电动餐桌锅的使用方法图解在烫蜡过程中遇到家具上带有漆芯藤面时，要使用小火，把吹风机的温度调低和采取需要的措施，要蜡面薄厚一致，光亮美观。厂家定做电动餐桌锅的使用方法图解在烫蜡过程中遇到老榆木桌椅上带有细小透雕纹饰时，采用微火烫蜡或采取抬高吹风机，使吹风机远离家具，使蜡能溶化又不会把纹饰的花边烤焦。

Illustration of the usage method for customized electric dining table pans by manufacturers. When encounring lacquer core rattan surfaces on furniture during the waxing process, it is necessary to use low heat, lower the mperature of the hair dryer, and take necessary measures to ensure that the wax surface is consisnt in thickness, bright and beautiful. Illustration of the usage method for customized electric dining table pans by manufacturers. When encounring small carved patrns on old elm tables and chairs during the waxing process, use low heat waxing or raise the hair dryer to keep the hair dryer away from the furniture, so that the wax can melt without scorching the lace of the patrns.

 

 

 

烫蜡期间需修改电源插座及另接电源线时应由电工操作，在施工现场应配备灭火器，要经常检查所用电气设备、电源线接头是否牢固罗丝松动，要经常使用测电笔测试电器及电源线是否存在漏电现象。

During the waxing period, it is necessary to modify the power socket and connect the power cord separaly, which should be operad by an electrician. Fire extinguishers should be equipped on the construction si, and the electrical equipment used and the power cord connectors should be regularly checked for firmness and looseness. A st pen should be used frequently to st the electrical appliances and power cords for leakage.

油烟火锅控制器厂家在烫蜡过程中的注意事项就介绍完，仅供大家参考。此外还需要注意的是，老榆木桌椅烫蜡过程中，要求施蜡要均匀，烫蜡薄厚要一致，不得有斑秃也不能起泡，否则就会影响烫蜡效果。

The precautions for the manufacturer of the oil fume hot pot controller during the waxing process have been introduced for your reference only. In addition, it should be nod that during the waxing process of old elm tables and chairs, the wax application should be uniform, the thickness of the waxing should be consisnt, and there should be no bald spots or bubbles, otherwise it will affect the waxing effect.