电动餐桌生产厂 电动火锅餐台旋转机芯

使用的餐厅大多比较注重餐厅环境，因此餐桌椅不仅需要保持实用价值，还要保持美观的外表。这也是定期保养的根源所在。定期保养也就是我们通常所说的打蜡，它不仅能够锁定餐桌椅内部水分，隔外部环境侵扰，阻止餐桌椅变形，还能让餐桌椅保持光鲜的外电动餐桌生产厂 电动火锅餐台旋转机芯表。

Most restaurants focus on the dining environment, so the tables and chairs not only need to maintain practical value, but also maintain a beautiful appearance. This is also the root cause of regular maintenance. Regular maintenance, also known as waxing, not only locks in moisture inside the dining table and chairs, isolates external environmental disturbances, prevents deformation, but also maintains a shiny appearance.

接下面我们就来为大家介绍餐桌椅打蜡的详细步骤打蜡之前的预处理包括除尘和清洗两大步骤。

 

 

 

Next, we will introduce the detailed steps of waxing dining tables and chairs. Pre treatment before waxing includes two major steps: dust removal and cleaning.

（1）除尘：实木餐厅桌椅打蜡之前首先要做好除尘工作。除尘的工具就用干棉布即可，千万不能使用海绵或者一些粗糙的清洁工具，避免对餐桌椅饰面造成摩擦，也避免静电吸附导致除尘不。

(1) Dust removal: Before waxing the tables and chairs in solid wood restaurants, the first step is to do a good job of dust removal. Use a dry cotton cloth for dust removal tools, and never use sponges or rough cleaning tools to avoid friction on the surface of dining tables and chairs, as well as to avoid electrostatic adsorption that may cause dust removal to fail.

（2）清洁：除尘过后就是对进行进一步清洁，这一步旨在清电动餐桌生产厂 电动火锅餐台旋转机芯洁餐桌椅表面的污垢，以及之前打蜡留下的蜡层，因此清洁过程中需要用到温水和专业的清洁剂。在完成后待晾干就可以正式进行餐桌椅打蜡工作。

 

 

 

 

 

(2) Cleaning: After dust removal, further cleaning is carried out, which aims to clean the dirt on the surface of the dining table and chairs, as well as the wax layer left by previous waxing. Therefore, warm water and professional cleaning agents are required 电动餐桌生产厂 电动火锅餐台旋转机芯during the cleaning process. After completion, the table and chairs can be officially waxed after being dried.

其实，所有的木质家具在使用过程中都需要定期打蜡，一般以一年一次的频率进行，打蜡时机也多选在换季之际，例如春夏之交就尤为合适。这一点对也不例外。而打蜡需要注意的不仅仅是打蜡频次和时间，还要别主要蜡油本身。市场上有些有一些含有硅树脂的上光蜡，小编在此提醒，千万不要选用这种保养蜡，硅树脂不仅会软化表面的饰面，还会堵塞木材毛孔，对餐桌椅造成不可性伤害。好，介绍完注意事项，下面我们再来看看电动餐桌锅设备公司椅保养具体操作方法吧

 

 

 

 

In fact, all wooden furniture needs to be waxed regularly during use, usually once a year, and the timing of waxing is often chosen during seasonal changes, such as the turn of spring and summer, which is particularly suitable. This is no exception. And waxing requires attention not only to the frequency and time of waxing, but also to the wax oil itself. There are some polishing waxes on the market that contain silicone resin. I would like to remind you not to choose this type of maintenance wax. Silicone resin not only softens the surface finish, but also clogs wood pores, causing irreparable damage to dining tables and chairs. Okay, after introducing the precautions, let's take a look电动餐桌生产厂 电动火锅餐台旋转机芯at the specific maintenance methods for electric dining table and pot equipment company chairs

（1）将保养蜡涂在清洗干净的棉布上，注意一次用蜡不要太多，否则很容易在电动餐桌锅设备公司表面留下痕迹，且容易粘灰。

 

 

 

 

(1) Apply maintenance wax to a clean cotton cloth, being careful not to use too much wax at once, otherwise it is easy to leave marks on the surface of the electric dining table and pot equipment company, and it is easy to stick to dust.

（2）顺着电动餐桌锅设备公司木材纹理将保养蜡涂在桌椅表面。记住，涂上薄薄一层即可保持餐桌椅光鲜，既不要涂太厚，也不要漏涂。如果一次用蜡过多，则可以用另外一块干净的棉布擦去多余蜡油。

(2) Apply maintenance wax to the surface of the tables and chairs f电动餐桌生产厂 电动火锅餐台旋转机芯ollowing the wood texture of the electric dining table and pot equipment company. Remember, applying a thin layer can keep the dining table and chairs shiny, neither too thick nor too loose. If too much wax is used at once, you can use another clean cotton cloth to wipe off the excess wax.

（3）上蜡过程中要避免过度摩擦，也不宜大力涂抹，这对蜡层是有害的，而且很容易导致蜡层不均，出现类似水痕的痕迹，十分难看。

(3) During the waxing process, excessive friction should be avoided, and it is not advisable to apply vigorously, as this is harmful to the wax layer and can easily lead to uneven wax layers, resulting in water marks that are very unsightly.