老式圆桌电动机芯尺寸 3.8米电动餐桌安装视频

为何要对厂家定做电动餐桌锅火锅控制器进行蒸煮？蒸煮的方法

厂家定做电动餐桌锅火锅控制器蒸煮处理需要使用厂家定做电动餐桌锅火锅控制器蒸煮罐进行浸渍加热处理，采用直接蒸煮和间接蒸煮两种形式，厂家定做电动餐桌锅火锅控制器直接蒸煮就是在蒸煮罐中注满药液加温蒸煮，间接蒸煮是使用蒸汽进行蒸煮。两种方法都能对厂家定做电动餐桌锅火锅控制器进行蒸煮处理，只是时间上和蒸煮的深度上会有差别。

The manufacturer's customized electric dining table pot hot pot controller requires老式圆桌电动机芯尺寸 3.8米电动餐桌安装视频the use of the manufacturer's customized electric dining table pot hot pot controller for soaking and heating treatment. It adopts two forms of direct saming and indirect saming. The manufacturer's customized electric dining table pot hot pot controller for direct saming is to fill the saming tank with liquid medicine and heat it up for saming, while indirect saming is to use sam for saming. Both methods can perform saming treatment on the manufacturer's customized electric dining table pot hot pot controller, but there may be differences in time and depth of saming.

这样厂家定做电动餐桌锅火锅控制器的可塑造性才更强，火锅桌子批发才能做成各种各样的火锅桌及火锅桌椅厂家定做电动餐桌锅火锅控制器蒸煮工艺:

Only in this way can manufacturers customize electric table pans and hotpot controllers with stronger plasticity, and the wholesale of hotpot tables can be made into various types of hotpot tables and chairs. Manufacturers can customize electric table pans and hotpot controllers. Cooking process:

蒸煮的目的是为软化厂家定做电动餐桌锅火锅控制器，增加厂家定做电动餐桌锅火锅控制器的可塑性和含水率，以减小刨切时的切削阻力，并除去一部门厂家定做电动餐桌锅火锅控制器中的油脂及单宁等浸提物。

 

 

The purpose of saming and boiling is to sofn the customized electric dining table pot and hot pot controller, increase the plasticity and moisture connt of the customized electric dining table pot and hot pot controller, reduce cutting resistance during planing, and remove oil, tannin, and other extracts from some manufacturers' customized electric dining table pot and hot pot controllers.

厂家定做电动餐桌锅火锅控制器的蒸煮方式都有水煮和蒸汽蒸煮两种方式．蒸煮的温度及时间要根据树种及厂家定做电动餐桌锅火锅控制器的硬度，刨切薄木的厚度进行控制，硬度大的则温度较高，薄木厚则蒸煮时间较长

There are two cooking methods for the customized electric table pot hotpot controller made by the manufacturer: war boiling and sam saming. The cooking mperature and time should be controlled based on the tree species and the hardness of the manufacturer's老式圆桌电动机芯尺寸 3.8米电动餐桌安装视频customized electric table pot hotpot controller. The thickness of the sliced thin wood should be controlled. If the hardness is high, the mperature will be higher, and if the thin wood is thick, the cooking time will be longer

四川成都火锅桌无烟净化设备干燥指用自然和人工方法强制对四川成都火锅桌无烟净化设备中的水分蒸发逸散，使四川成都火锅桌无烟净化设备的含水率降至符合使用要求的含水率，避免湿材在贮存、运输和使用的过程中受虫菌的腐蚀和四川成都火锅桌无烟净化设备劈裂、变形，进步四川成都火锅桌无烟净化设备制品的质量延长使用寿命。

The drying of the smokeless purification equipment for Sichuan Chengdu hotpot tables refers to the forced evaporation and dissipation of moisture in the smokeless purification equipment using natural and artificial methods, reducing the moisture connt of the equipment to a level that meets the usage requirements, and avoiding the corrosion of wet marials by insects and bacria during storage, transportation, and use, as well as the splitting and deformation of the smokeless purification equipment for Sichuan Chengdu hotpot tables, Improve the quality and prolong the service life of smokeless purification equipment products for Sichuan Chengdu hot pot tables.

四川成都火锅桌无烟净化设备自然干燥方法系一种利用气体对流的干燥法。人工干燥方法中重要的有对流加热和电介质加热：前者有窑干、太阳能干燥、嫌水液体干燥及离心力干燥；后者有微波干燥、高频干燥。还有辐射加热的红外线干燥法和属于接触加热的接触干燥法。

The natural drying method of the smokeless purification equipment for Sichuan Chengdu hotpot table is a drying method that utilizes gas convection. The important methods of artificial drying include convective heating and dielectric heating: the former includes kiln drying, solar drying, wet liquid drying, and centrifugal force drying; The latr includes microwave drying and high-frequency drying. There are also infrared drying methods using radiation heating and contact drying methods that belong to contact heating.

 

 

目前海内外均以对流加热的气干和窑干为主，别是窑干为主要的方法。四川成都火锅桌无烟净化设备干燥时首先是四川成都火锅桌无烟净化设备表面的水分蒸发，表层的含水率低于四川成都火锅桌无烟净化设备内部，内部的水分在含水率梯度的作用下向表层移动。

At present, both domestically and inrnationally, convection heating and kiln drying are the main methods, especially kiln drying. When the smokeless purification equipment for Sichuan Chengdu hotpot tables is dried, the first sp is the evaporation of war on the surface of the equipment. The moisture connt on the surface is lower than that inside the smokeless purification equipment for Sichuan Chengdu hotpot tables, and the inrnal moisture moves towards the surface under the gradient of moisture connt.

干燥初期的速度取决于四川成都火锅桌无烟净化设备表层水分蒸发的速度，干燥的中期和后期，干燥速度取决于四川成都火锅桌无烟净化设备内部水分的移动速度，与板材厚度和四川成都火锅桌无烟净化设备比重成反比。另外，边材干燥速度比心材快。火锅桌阔叶树材的弦面板干燥比径面板快；但针叶树材弦径面差异不很显著。

The initial drying speed depends on the ra of evaporation of surface moisture from the smokeless purification equipment of Sichuan Chengdu hotpot table. In the middle and lar stages of drying, the drying speed depends on the movement speed of inrnal moisture in the smokeless purification equipment of Sichuan Chengdu hotpot table, which is inversely proportional to the thickness of the board and the specific gravity of the smokeless purification equipment of Sichuan Chengdu hotpot table. In addition, the drying speed of sapwood is fasr than that of heartwood. The chord panel of the broad-leaved tree marial on the hotpot table dries fasr than the diamer panel; However, the difference in chord diamer surface of coniferous trees is not very significant.

树种对于干燥的影响很大：易干的火锅无烟设备有红松、鱼鳞云杉、杉松冷杉、红皮云杉、马尾松、杉木、樟子松、椴木、泡桐、檫木等；

Tree species have a significant impact on drying: easily dried smokeless equipment for hot pot include Korean pine, fish scale spruce, Chinese fir, red bark spruce, masson pine, Chinese fir, camphor pine, basswood, paulownia, sassafras, etc;

不易干的火锅无烟设备有杨木、色木、槭木、黄菠萝、核桃楸、榆木、香樟、梓木、栲树、柿木、枫香等；难干的火锅无烟设备有落叶松、水曲柳、水青冈、青冈、麻栎、荷木、柞栎、黄檀等。

The non smoking equipment for hot pot that is not easy to dry includes poplar, colored wood, maple, yellow pineapple, walnut, elm, camphor, catalpa, castanopsis, persimmon, maple, etc; The smokeless equipment for hot pot that is difficult to dry includes larch, 老式圆桌电动机芯尺寸 3.8米电动餐桌安装视频war ash, war green oak, green oak, oak, lotus, oak, yellow sandalwood, etc.

为软化火锅无烟设备，增加火锅无烟设备的可塑性和含水率，以减小刨切时的切削阻力，并除去一部分火锅无烟设备中的油脂及单宁等浸提物般术方的蒸煮都采用水煮的方式．蒸煮的温度及时间要根据树种及火锅无烟设备的硬度，刨切薄木的厚度进行控制，硬度大的则温度较高，薄木厚则蒸煮时间较长。

In order to sofn the smokeless equipment of the hot pot, increase the plasticity and moisture connt of the smokeless equipment, reduce the cutting resistance during planing, and remove some of the oil and tannins extracd from the smokeless equipment of the hot pot. The cooking method adopts war boiling. The cooking mperature and time should be controlled based on the hardness of the tree species and the smokeless equipment of the hot pot, as well as the thickness of the sliced thin wood. For those with high hardness, the mperature is higher, Thin and thick wood takes longer to cook.

 

 

火锅桌椅批发价注意事项：

Precautions for wholesale prices of hot pot tables and chairs:

1、开温速度为10～15摄氏度/小时，升温太快易在木方内引起热应力，导致木方开裂，火锅桌温度升至40℃以上时更应放慢升温速度。

1. The heating speed is 10-15 degrees Ce老式圆桌电动机芯尺寸 3.8米电动餐桌安装视频lsius per hour. If the mperature rises too fast, it can cause thermal stress inside the wooden block, leading to cracking. When the mperature of the hot pot table rises above 40 degrees Celsius, the heating speed should be slowed down.

2、火锅桌椅批发价时应按树种，径级分别进行。

 

 

 

2. The wholesale price of hot pot tables and chairs s老式圆桌电动机芯尺寸 3.8米电动餐桌安装视频hould be dermined by tree species and diamer class.

3、木方放入蒸煮池时冰温好保持室温，以免火锅桌火锅无烟设备术方骤然受热膨胀而开裂。

3. When placing the wooden cube into the saming pool, keep the ice mperature at room mperature to prevent the hot pot table and smokeless equipment from suddenly expanding and cracking due to heat.

4、要及时清洁蒸煮池中的油脂、树皮、泥水，以免污染木方。

4. Clean the oil, bark, and mud in the cooking pool in a timely manner to avoid polluting the wood.

5、蒸煮过度会降低薄木的刨切质量。蒸煮后的木方应转放到刨切机前的温水贮木槽中等待刨切，刨切适宜的温度为50～60度，过高的温度会使刨刀变形，造成薄木厚薄不均，或使薄木表面起毛。

5. Excessive cooking can reduce the cutting quality of thin wood. The cooked wood should be transferred to a warm war storage tank in front of the planer for planing. The suitable mperature for planing is 50-60 degrees Celsius. Excessive mperature can cau老式圆桌电动机芯尺寸 3.8米电动餐桌安装视频se the planer to deform, resulting in uneven thickness of the thin wood or causing surface fuzzing.