酒店家具人造石餐桌生产过程中应注意的问题

酒店家具人造石餐桌生产过程中应注意的问题-佛山岚慧家具有限公司
Precautions in the production process of hotel furniture artificial stone dining tables - Foshan Lanhui Furniture Co., Ltd



酒店家具人造石餐桌在生产过程中应注意的事项：
Precautions for the production process of hotel furniture artificial stone dining tables:
1、酒店家具人造石餐桌外观质量外观质量首先要求家具表面光滑，做工精细，装饰精细，质地清晰美观。室内家具通常由刨花板、中密度纤维板、细木工板、层压板等制成，单板、木单板、三层胶合板作为覆盖材料.不同基材和包层材料的材料性能也不同。如果不注意材料的te性和正确使用方法，往往会导致钢板翘曲。北京和俊新美家具建议，面板背面和正面的覆层材料的结构te征必须相同或相似。基材的含水量应为6-10%，材料应尽可能多地选择同一批次。缩短装压时间，不同材料te性，不同含水率的覆盖材料，注意不同厚度的胶水，压榨时间和压力。
1. The appearance quality first requires furniture to have a smooth surface, fine workmanship, fine decoration, and clear and beautiful texture. Indoor furniture is usually made of particle board, medium density fiberboard, blockboard, laminated board, etc. Veneer, wood veneer, and three-layer plywood are used as covering materials. The material properties of different base materials and cladding materials are also different. If we do not pay attention to the material's properties and correct usage, it often leads to steel plate warping. Beijing and Junxinmei Furniture suggest that the structural characteristics of the cladding materials on the back and front of the panel must be the same or similar. The moisture content of the substrate should be 6-10%, and as many materials as possible should be selected from the same batch. Shorten the loading time, cover materials with different material properties and moisture content, pay attention to different thicknesses of glue, pressing time, and pressure.




2、结构强度是酒店家具人造石餐桌生产过程中应注意的第二点室内家具大多以固定家具、板材为主的一般结构，选用木螺丝、五金连接器和胶粘剂作为连接方式。在使用材料时应注意不同的材料te性，如刨花板、中密度板钉握力差，避免需要频繁移动或钉握力强的部位，如门铰链螺钉、底轨螺钉等，容易松脱。钕应te别注意床板和框架上的金属悬挂部分，或使用木材代替加固。目前，流行的45度倒木悬挂结构。
2. The structural strength is the second point that should be paid attention to during the production process of hotel furniture artificial stone dining tables. Most indoor furniture is a general structure mainly composed of fixed furniture and boards, and wooden screws, hardware connectors, and adhesives are used as the connection methods. When using materials, attention should be paid to the te properties of different materials, such as particle board and medium density board, which have poor nail grip, to avoid the parts that need frequent movement or strong nail grip, such as door hinge screws, bottom rail screws, etc., which are easy to loosen. Neodymium should pay special attention to the metal suspension parts on the bed board and frame, or use wood instead of reinforcement. At present, the popular 45 degree inverted wood suspension structure.





3、材料成本还满足使用要求，尽量使用低成本的材料，在使用大表面材料的同时注意使用小块相同材料，全面提高板材利用率。房间家具的数量一般比较大，尽量利用计算机进行合理的布局，对大小件材料进行综合利用，降低材料成本。不同的结构应注意材料成本的比较。
3. The material cost also meets the usage requirements, and low-cost materials should be used as much as possible. When using large surface materials, attention should be paid to using small pieces of the same material to comprehensively improve the utilization rate of the board. The quantity of furniture in a room is generally relatively large, and it is recommended to use computers for reasonable layout and comprehensive utilization of materials for large and small items to reduce material costs. Different structures should pay attention to the comparison of material costs.

4、高效生产酒店家具人造石餐桌在饭店家具材料成本相同的情况下，这种材料易于加工，这种技术可以节省加工成本，提高效率，te别是在端铣、圆磨、雕刻加工中，这种材料易于加工切削，易于光洁，易于加工。
4. Efficient production: When the cost of hotel furniture materials is the same, this material is easy to process. This technology can save processing costs and improve efficiency. Especially in end milling, circular grinding, and carving processing, this material is easy to process and cut, easy to clean, and easy to process.

5、运输与安装酒店家具人造石餐桌，酒店的楼层一般都很高，要求家具的重量很容易运输。te别是一些连接床背、一些加长办公桌、电梯无法运输、货运电梯一般在安装家具时已拆除，如何安全运输，从材料和结构的重量方面要te别考虑。
5. The floors of hotels for transportation and installation are generally high, requiring the weight of furniture to be easily transported. Especially for some connected bed backs, some extended office desks, elevators that cannot be transported, and freight elevators that are usually removed during furniture installation, how to safely transport should be considered in terms of material and structural weight.





6、安全性能一般酒店不规定甲醛含量，但有家具防火要求，在酒店允许某些部位的防火板、防烫伤漆、阻燃织物等。豪华酒店甚至要求家具着火。在实际应用中应考虑上述因素。佛山酒店家具人造石餐桌的功能要求与酒店家具人造石餐桌公司合理的材料结构和车间工艺布置具有互动关系。降低成本，采用专业加工技术，加工设备，使家具的生产符合高端酒店以人为本的舒适要求。
6. Safety performance: Generally, hotels do not specify formaldehyde content, but there are fire protection requirements for furniture. In hotels, fire resistant panels, anti burn paint, flame retardant fabrics, etc. are allowed in certain areas. Luxury hotels even require furniture to catch fire. The above factors should be considered in practical applications. The functional requirements of the Foshan hotel furniture artificial stone dining table are interactive with the reasonable material structure and workshop process layout of the hotel furniture artificial stone dining table company. Reduce costs, adopt professional processing technology and equipment, and ensure that the production of furniture meets the comfortable requirements of high-end hotels that are people-oriented.