人造大理石电动餐桌 电动餐台常用板材拼接方式

人造大理石电动餐桌  电动餐台常用板材拼接方式有两种

There are two common methods for splicing solid wood electric tables and electric dining tables

 

 

无论是指接材，还是拼板材，仅仅是拼板工艺的不同，实际上都是实木电动桌板材。但是齿接材在顺长方向的纹理上有中断表现，木纹不够通畅。拼板材则纹理通畅，但相邻两块板之间往往会有色差。全实木电动桌电动餐台的色差问题是天生的，可以不用计较。

Whether it is referring to connecting materials or assembling panels, the difference in splicing process is actually solid wood electric table panels. However, there are interruptions in the longitudinal texture of the tooth joint material, and the wood grain is not smooth enough. Splicing boards results in smooth texture, but there is often a color difference between adjacent boards. The color difference issue with electric dining tables made of solid wood is inherent and can be ignored.

 

只有利用覆面工艺可使色差无限减小，但是这种工艺制作的电动餐台不属于全实木电动桌电动餐台，是属于实木电动桌覆面电动餐台（也叫做实木电动桌贴面电动餐台）范畴；还有一种利用油漆涂饰完全掩盖木材也可使色差消失，但电动餐台表面没有任何天然木纹，这类电动餐台是根据款式的点而采用。

Only by using the covering technology can the color difference be infinitely reduced, but the electric dining table made by this technology does not belong to the category of all solid wood electric table electric dining table, but belongs to the category of solid wood electric table covering electric dining table (also known as solid wood electric table veneer electric dining table); There is also a method of using paint to completely cover up the wood, which can also make the color difference disappear, but the surface of the electric dining table does not have any natural wood grain. This type of electric dining table is adopted according to the style.

 

1、指接材指接材也叫齿接材或集成材，是工业机械发展到一定阶段才出现的木材拼板技术。利用机械设备把截好的木材铣齿，然后涂胶拼接，拼接处能看到齿状咬合痕迹，是长度拼接的一种工艺。齿接材的优点之一提高木材的综合利用率，减少资源性浪费；

1. Finger joint material, also known as toothed joint material or laminated wood, is a wood panel technology that only emerged at a certain stage in the development of industrial machinery. Using mechanical equipment to mill the cut wood into teeth, then applying glue to splice it together. The bite marks of the teeth can be seen at the splice, which is a process of length splicing. One of the advantages of tooth joint material is to improve the comprehensive utilization rate of wood and reduce resource waste;

 

优点之二是可以去掉所有疤节、霉变及腐朽等天然缺陷，提高材质优选率；优点之三是能显著提高材性稳定，物理力学性能良好的指接材强度为天然实木电动桌的 1～1.5倍，大程度保证电动餐台的品质。

The second advantage is that it can remove all natural defects such as scars, mold, and decay, improving the material selection rate; The third advantage is that it can significantly improve the stability of material properties, and the strength of finger joints with good physical and mechanical properties is 1-1.5 times that of natural solid wood electric tables, greatly ensuring the quality of electric dining tables.

 

2、拼板材拼板材是指长度采用整料，从宽度方向拼接的板材，通常描述为横向拼接。拼板材的优点是木纹连贯，无中断现象，视觉效果好，制成品整体外观较美观；其缺点也很明显，先是出材率低，

2. Splicing boards refers to boards that are assembled in the width direction using a single piece of length, usually described as horizontal splicing. The advantages of splicing boards are that the wood grain is coherent, without interruption, the visual effect is good, and the overall appearance of the finished product is relatively beautiful; Its disadvantages are also very obvious. Firstly, the yield is low,

 

造价高；其次是稳定性与长度成正比关系，板材越长，越容易曲翘变形，同时制成品对使用环境要求较高。拼板材是优缺点都很明显的一种材质，造价、美观度和稳定性之间达到平衡才是理想的使用方式。

High cost; Secondly, stability is directly proportional to length. The longer the board, the easier it is to warp and deform. At the same time, the finished product has higher requirements for the usage environment. Splicing boards is a material with obvious advantages and disadvantages, and achieving a balance between cost, aesthetics, and stability is the ideal way to use them.