酒店实木电动餐台定制厂家 可旋转餐桌-佛山岚

酒店实木电动餐台定制厂家  可旋转餐桌-佛山岚慧电动餐台

Customized solid wood electric dining table manufacturer for hotels: Advantages Collection - Foshan Lanhui Electric dining table

 

 

 

一，实木电动餐台的优点

1、 Advantages of Solid Wood Electric Dining Table

1.实木电动餐台实木拼板油漆后，表面没有拼胶缝和板条的高低不平现象，而且在实木电动餐台长期使用过程中物理性能比较稳定;

1. After the solid wood electric table is painted, there is no glue joint and uneven Flat noodles on the surface, and the physical performance is relatively stable during the long-term use of the solid wood electric table;

 

 

 

2.木材利用率较高，符合原材料生态利用的原则。所以在使用和纹理色泽方面，实木拼板装饰板更适合于实木电动餐台的使用和装饰功能;

2. The utilization rate of wood is high, which conforms to the principle of ecological utilization of raw materials. So in terms of use and texture color, solid wood panel decorative boards are more suitable for the use and decorative functions of solid wood electric dining tables;

 

 

 

3.虽然实木电动餐台实木拼板板材施胶量大于实木宽拼板，但因有双覆面厚单板的保护，和四边厚单板封边实际上只有两面四边8条胶缝，所以实木拼板中胶粘剂透过胶缝挥发的化学物质远远低于实木宽拼板和实木集成材的挥发量，更环保、更健康。

Although the amount of adhesive applied to the solid wood electric dining table board is greater than that of the solid wood wide panel, due to the protection of double clad thick veneer and the fact that there are only 8 adhesive seams on both sides and four sides for edge sealing of the four sided thick veneer, the chemical substances evaporated through the adhesive seams in the solid wood panel are far lower than the volatilization amount of the solid wood wide panel and the solid wood integrated panel, which is more environmentally friendly and healthy.

 

 

 

4.由于芯板采用的是各向异性小的木材拼成，板材表面不平和翘曲程度小，上下两面覆两张刨切薄木厚单板，能较好的消除板面翘曲不平、开裂变形现象，且能提高板材各个方向的物理强度;

4. Due to the use of wood with low anisotropy as the core board, the surface of the board is uneven and the degree of warping is small. Covering the upper and lower sides with two thin sliced wooden thick veneer boards can effectively eliminate the phenomenon of warping, unevenness, cracking and deformation on the board surface, and improve the physical strength of the board in all directions;

 

 

 

5.刨切薄木厚单板是精选大径级的优等原木，而且按照纹理、颜色严格挑选，采用高精度的设备和科学的刨切方法制造而成。这样的加工工艺处理，在纹理、色泽方面正体感非常好，油漆后更突出质感，生产的正套实木电动餐台能营造一种和谐一致、高档的价值感。

5. Planing thin and thick veneer is made by selecting high-quality logs of large diameter grade, strictly selecting according to texture and color, using high-precision equipment and scientific planing methods. This processing technology provides a very good sense of authenticity in terms of texture and color, and highlights the texture after painting. The produced solid wood electric dining table can create a harmonious, consistent, and high-end sense of value.