酒店实木电动餐桌椅修复 实木自动餐桌厂家批发

酒店实木电动餐桌椅修复  实木自动餐桌厂家批发

Renovation Techniques for Repairing Solid Wood Electric Dining Tables and Chairs in Hotels

 

 

 

1、酒店实木电动餐桌椅翻新方法：一般在酒店实木电动餐桌椅翻新前，很多处电动桌都会存在着严重的刮痕、开裂等现象，因此需要将其进行处理；然后将酒店实木电动餐桌椅表面清洁干净再进行打磨，打磨可采用专门的电动桌酒店实木电动餐桌椅翻新打磨机器，其目的是为了刮掉木电动桌上的漆；

1. Renovation method for hotel solid wood electric dining tables and chairs: Generally, before the renovation of hotel solid wood electric dining tables and chairs, many electric tables will have serious scratches, cracks, and other phenomena, so they need to be treated; Then clean the surface of the hotel's solid wood electric dining table and chair before polishing. The polishing can be done using a specialized electric table hotel solid wood electric dining table and chair refurbishment and polishing machine, with the aim of scraping off the paint on the wooden electric table;

 

 

 

接下来调配好腻子，并均匀的涂抹在酒店实木电动餐桌椅上，并将其风干；电动桌上的腻子风干后便可以进行上漆、上油和打蜡了，等到油漆干燥后，酒店实木电动餐桌椅翻新也就算完成了。

Next, prepare the putty and evenly apply it to the hotel's solid wood electric dining table and chair, and air dry it; After the putty on the electric table is air dried, it can be painted, oiled, and waxed. After the paint dries, the renovation of the hotel's solid wood electric dining table and chairs is considered complete.

2、酒店实木电动餐桌椅翻新技巧：在对酒店实木电动餐桌椅进行打磨后需要观察电动桌的平整度，如果有明显的凹凸处，则需要重新打磨平整，打磨的厚度在0.5毫米左右适宜；其次是很多墙角处用打磨机器是不能够打磨到的。

2. Renovation techniques for hotel solid wood electric dining tables and chairs: After polishing the hotel solid wood electric dining tables and chairs, it is necessary to observe the flatness of the electric table. If there are obvious concave and convex areas, they need to be re polished and leveled, with a suitable thickness of about 0.5mm; Secondly, many wall corners cannot be polished with polishing machines.

 

 

 

 

因此需要用砂纸进行手动打磨，这样才能够保证打磨的效果，而打磨的方法好是先用粗砂纸打磨，再使用细砂纸，从四个方向逐一进行；

Therefore, it is necessary to manually polish with sandpaper in order to ensure the polishing effect. A good polishing method is to first polish with coarse sandpaper, and then use fine sandpaper, one by one from four directions;

酒店实木电动餐桌椅翻新后的打蜡和上油十分的重要，这能够提高酒店实木电动餐桌椅的使用寿命和光泽，因此在腻子风干后应按照上油漆、上油、打蜡的顺序进行。

The waxing and oiling of renovated solid wood electric dining tables and chairs in hotels is very important, which can improve the service life and luster of the hotel's solid wood electric dining tables and chairs. Therefore, after the putty is air dried, it should be done in the order of painting, oiling, and waxing.

 

 

 

 

3、酒店实木电动餐桌椅翻新的养护：酒店实木电动餐桌椅翻新后效果几乎和新购买是没有区别，但是它的表面却被打磨了，因此酒店实木电动餐桌椅的厚度也变薄了，从而其生命也变得更加脆弱了，因此需要好好的养护。

3. Maintenance of the renovation of hotel solid wood electric dining tables and chairs: The effect of the renovation of hotel solid wood electric dining tables and chairs is almost the same as that of a new purchase, but its surface has been polished, so the thickness of the hotel solid wood electric dining tables and chairs has also become thinner, making their lives more fragile. Therefore, good maintenance is needed.

 

 

 

 

酒店实木电动餐桌椅翻新后的养护先需要每一个月打蜡一次，这样能够保持木电动桌表面的光泽度；同时在翻新后，不能够将砂石带入，否则会磨损酒店实木电动餐桌椅表面；对于酒店实木电动餐桌椅的接缝也需要定期处理，否则长期堆积便难以处理，是表面的美观度下降。·：

The maintenance of the renovated solid wood electric dining tables and chairs in the hotel requires waxing once a month to maintain the glossiness of the wooden electric table surface; After renovation, sand and gravel should not be brought in, as it may wear and tear the surface of the hotel's solid wood electric dining table and chairs; The joints of the hotel's solid wood electric dining tables and chairs also need to be regularly treated, otherwise they will be difficult to handle due to long-term accumulation, resulting in a decrease in surface aesthetics